User manual

Finish

✔ Finish has been selected in the check list and SET has been pressed. One of 2 possible dia-

logues is displayed.

1. Proceed as follows, depending on the respective dialogue:

n Dialogue Settings are incomplete: Press SET and work through the open items in

the check list.

n Dialogue Are all settings correct?:

Press ESC to correct settings or

2. Press and hold SET (> 1 s) to finish 1st commissioning.

✓ If SET was pressed for a longer time then the inverter starts anew and synchronises itself

with the grid (Fig. left).

747.431 | Z09.3 | 2017-09-05