User manual

4. Press ESC to go one level higher to Energy management.
Dynamic feed-in regulation
NOTICE!
The power fed into the grid is adjusted in 10 W steps. It can be limited to a minimum of 0
W.
Configuration of the energy meter
NOTICE!
The inverter can only work with energy meters that have been pre-programmed in the
inverter. The pre-programmed energy meters are listed under Meter type.
1. Press SET to call up the item.
2.
Press rs to select a meter type.
3. Press SET.
4. Press ESC to quit the sub-menu.
EN
747.431 | Z09.3 | 2017-09-05 53