User manual

Calling up the service menu and editing the values
NOTICE!
Risk of yield losses and contravention of regulations and standards. Inverter and grid param-
eters can be changed in the service menu. The service menu must therefore only be used by
technical professionals who know the applicable regulations and standards.
1. Select the Service menu item.
2. Press SET.
ð
The fig. shown at the left appears.
3.
Press rs simultaneously for 3 seconds.
ð
The service menu is displayed (Fig. left).
4.
Press rs to select a menu item.
5. Press SET to edit the menu item. The following applies:
n Enter the password if required (Fig. left); see
Ä Chapter 3.3.4 „Service
menu“ on page 21.
n If necessary, press rs within a menu item to display and edit other settings (e.g.
Voltage limits).
n The menu items are described in
Ä Chapter 3.3.4 „Service menu“ on page 21.
EN
747.431 | Z09.3 | 2017-09-05 61