Datasheet

ManualsBrandsSTECA ManualsSolar System AccessoriesTarom MPPT 6000-S Charge controller MPPT 12 V, 24 V, 36 V, 48 V, 60 V 60 A

SOLAR CHARGE CONTROLLERS

Steca Tarom MPPT

6000-S, 6000-M

The new design for the Steca Tarom sets new standards in this

power class. The graphic display informs the user of all important

system data. The data are saved by the integrated data logger.

___Thanks to the significantly improved state of charge

determination, the system is optimally controlled and the batteries

are protected. The Steca Tarom charge controller is the ideal choice

for larger systems at three voltage levels (12 V, 24 V, 48 V).

___Two additional switching contacts can be freely configured as a

timer, a night light function, to start generators or as surplus

management.

Product features

Two independent maximum power point trackers (MPP trackers)

Two inputs (connected in parallel or used separately for two

different module arrays)

Robust metal casing

Comprehensive data logging of energy values for up to 20 years

MicroSD slot for data logging of all minute values (6000-M only)

Voltage and current regulation

Temperature compensation

Monthly equalisation charge

Three configurable multifunctional contacts (6000-M only)

Adjustable cut-off voltages

Battery type: gel/liquid lead battery (for 6000-M also Li and NiCd

batteries)

Integrated, automatic module switch

36 V and 60 V batteries can be charged with special settings in

expert menu level

Parallel connectable

Electronic protection functions

Overcharge protection

Reverse polarity protection of module and battery

Automatic electronic fuse

Open circuit protection without battery

Reverse current protection at night

Overtemperature and overload protection

PE connection

Displays

Multifunction graphical LCD display with backlighting

Interfaces

StecaLink Bus

Open Steca RS-232 interface

Battery emergency off signal connection (optional, 6000-M only)

Options

Connection for battery voltage sensor cable

Certificates

Compliant with European Standards (CE)

RoHS compliant

Made in Germany

Developed in Germany

Manufactured according to ISO 9001 and ISO 14001

Accessories

Data cable Steca PA CAB3 Tarcom (6000-M only)

Current sensor Steca PA HS400 (6000-M only)

External temperature sensor Steca PA TS-S (for 6000-M included

in the scope of delivery)

MPPT 6000-S / MPPT 6000-M

Characterisation of the operating performance

System voltage 12 / 24 / 48 V

Nominal power 900 W / 1800 W / 3600 W

Max. DC-DC efficiency 99.4 % (Ubatt=48 V; Uin=70 V;

P=0.65*Pnom)

European efficiency 96.6 % (Ubatt=24 V; Uin=30 V) 98.9 %

(Ubatt=48 V; Uin=70 V)

European efficiency (weighted across all

Ubatt and Uin)

96.4 %

Static MPP efficiency 99.9 % (DIN EN 50530)

Dynamic MPP efficiency 99.8 % (DIN EN 50530)

Weighted REW (Realistic Equally Weighted

efficiency)

94.8 %

Own consumption < 1 W

DC input side

Min. MPP voltage / input 17 V / 34 V / 68 V

Max. MPP voltage / input 180 V

Min. Open circuit voltage solar module /

input (at minimum operating temperature)

20 V / 40 V / 80 V

Max. Open circuit voltage solar module /

input (at minimum operating temperature)

200 V

Module current 2 x 30 A / 1 x 60 A

Battery side

Charge current 60 A

End-of-charge voltage 14.1 V / 28.2 V / 56.4 V

Boost charge voltage 14.4 V / 28.8 V / 57.6 V

Equalisation charge 15 V / 30 V / 60 V

Set battery type liquid (adjustable via menu)

Operating conditions

Ambient temperature -25 °C … +50 °C

Fitting and construction

Terminal (fine / single wire) 35 mm² - AWG 2

Degree of protection IP 31

Dimensions (X x Y x Z) 294 x 335 x 130 mm

Weight 6300 g

Technical data at 25 °C / 77 °F

Version 2017-03-06 10:07 www.steca.com/Steca-Tarom-MPPT-en

Summary of content (4 pages)

PAGE 1
Powered by TCPDF (www.tcpdf.org) SOLAR CHARGE CONTROLLERS Steca Tarom MPPT 6000-S, 6000-M The new design for the Steca Tarom sets new standards in this power class. The graphic display informs the user of all important system data. The data are saved by the integrated data logger. ___Thanks to the significantly improved state of charge determination, the system is optimally controlled and the batteries are protected.
PAGE 2
SOLAR CHARGE CONTROLLERS DOUBLE AWARDEE The Steca Tarom MPPT solar charge controller sets new standards in the area of Maximum Power Point trackers. Therefore the Steca Tarom MPPT 6000-M has won even two famous awards The Steca Tarom MPPT 6000-M dual MPPT peak charge controller, which won the renowned OTTI Innovation Prize, was awarded the Intersolar Award 2014 at the world‘s largest trade fair for the solar sector. This innovative product won over the judges due to its outstanding benefits. At 3.
PAGE 3
SOLAR CHARGE CONTROLLERS Greater efficiency. Greater flexibility. Greater comfort. Less devices. Less modules. Less costs. Save in the right places with Steca Tarom MPPT With its innovative functions, the Steca Tarom MPPT not only offers greater efficiency, flexibility and comfort but also helps to avoid certain unnecessary costs that are incurred during the planning, implementation and ongoing operation of PV systems. No need for additional devices! No need for additional modules! ...
PAGE 4
SOLAR CHARGE CONTROLLERS Enjoy numerous added benefits! User-friendly graphical LCD display The graphical multifunction display of the Tarom MPPT 6000-M and Tarom MPPT 6000-S displays all system states intuitively via icons. This permits a clear understanding of the energy flow. All parameters can be configured using the multi-lingual, intuitive menu.