User manual
Table Of Contents
- 1 General information
- 2 Quick guide
- 3 Overview
- 4 Installation of the base system
- 5 Initial commissioning of the base system
- 6 Installation and initial commissioning of optional components
- 6.1 Commissioning the SD card (MPPT 6000-M only)
- 6.2 AUX 1,2,3 relay output connection (MPPT 6000-M only)
- 6.3 AUX IO remote control input connection (MPPT 6000-M only)
- 6.4 PA TS-S external temperature sensor connection
- 6.5 StecaLink slave connection
- 6.6 StecaLink master connection (MPPT 6000-M only)
- 6.7 UART/RS-232 interface connection (MPPT 6000-M only)
- 6.8 Redundancy function (MPPT 6000-S only)
- 6.9 Install cable strain relief
- 7 Display (layout, function, operation)
- 8 System functions
- 8.1 Protection functions
- 8.2 Battery type setting
- 8.3 Current limit system setting (MPPT 6000-M only)
- 8.4 Current limit device setting
- 8.5 Lead-acid battery system functions
- 8.5.1 Equalisation cycle mode
- 8.5.2 Battery control mode (MPPT 6000-M only)
- 8.5.3 Battery capacity test (MPPT 6000-M only)
- 8.5.4 Battery type
- 8.5.5 Battery capacity
- 8.5.6 Current limit system (MPPT 6000-M only)
- 8.5.7 Current limit device
- 8.5.8 Charge voltages
- 8.5.9 IUIA charge mode (MPPT 6000-M only)
- 8.5.10 Start boost charge
- 8.5.11 Battery temperature sensor
- 8.5.12 Cable compensation
- 8.5.13 PV string connection
- 8.5.14 Expert menu
- 8.6 Li-Ion battery system functions (MPPT 6000-M only)
- 8.7 NiCd battery system functions (MPPT 6000-M only)
- 8.8 StecaLink bus
- 8.9 Internal data logger
- 8.10 Clear log data
- 8.11 Clear event log
- 8.12 Factory settings
- 8.13 UART/RS-232 interface (MPPT 6000-M only)
- 8.14 Acoustic alarm
- 8.15 SD card (MPPT 6000-M only)
- 9 Control functions via AUX 1/2/3 (MPPT 6000-M only)
- 10 Troubleshooting
- 11 Maintenance, dismounting and disposal
- 12 Technical data
- 13 Guarantee conditions, exclusion of liability, contacts, notes
48 V system Total MPPT power max. 3600 W
Power per PV string connection at MPPT 6000-M/-S
1000 W 1250 W
Total cable length ("M+" and "M−") in m,
Loss: <= 1.5 %; Insulation: 85 °C
2 x 30 m 2 x 10 m 2 x 30 m 2 x 10 m
MPP voltage
80 V
10 mm
2
AWG 7
4 mm
2
AWG 11
16 mm
2
AWG 5
6 mm
2
AWG 10
100 V
10 mm
2
AWG 7
2.5 mm
2
AWG 13
10 mm
2
AWG 7
4 mm
2
AWG 11
120 V
6 mm
2
AWG 10
2.5 mm
2
AWG 13
6 mm
2
AWG 10
2.5 mm
2
AWG 13
140 V
4 mm
2
AWG 11
1.5 mm
2
AWG 15
4 mm
2
AWG 11
1.5 mm
2
AWG 15
160 V
4 mm
2
AWG 11
1.5 mm
2
AWG 15
4 mm
2
AWG 11
1.5 mm
2
AWG 15
48 V system Total MPPT power max. 3600 W
Power per PV string connection at MPPT 6000-M/-S
1500 W 1800 W
Total cable length ("M+" and "M−") in m,
Loss: <= 1.5 %; Insulation: 85 °C
2 x 30 m 2 x 10 m 2 x 30 m 2 x 10 m
MPP voltage
80 V
16 mm
2
AWG 5
6 mm
2
AWG 10
25 mm
2
AWG 3
10 mm
2
AWG 7
100 V
16 mm
2
AWG 5
4 mm
2
AWG 11
16 mm
2
AWG 5
4 mm
2
AWG 11
120 V
10 mm
2
AWG 7
2.5 mm
2
AWG 13
10 mm
2
AWG 7
4 mm
2
AWG 11
140 V
4 mm
2
AWG 11
1.5 mm
2
AWG 15
6 mm
2
AWG 10
2.5 mm
2
AWG 13
160 V
6 mm
2
AWG 10
1.5 mm
2
AWG 15
6 mm
2
AWG 10
2.5 mm
2
AWG 13
756.404 | Z01 | 16.06
141