User manual
n Abs. max. power: The maximum power ever fed into the grid
3)
n Max. daily yield: The maximum daily yield achieved
3)
n Operating hours: The operating hours during which the device has been connected to the
grid (including night-time hours).
n Total yield: Yield since commissioning
n CO
2
savings: CO
2
savings achieved since commissioning
1)
Measurement is always displayed (cannot be switched off)
2)
Possible causes:
– Internal temperature too high
– User default Power limiter
– Frequency too high
– Controlled by grid operator (feed-in management)
– Delayed increase in power after starting
3)
Can be reset to 0 via Settings ▶ Reset max. vals.
Acoustic alarm
An acoustic alarm sounds (approx. 4.5 kHz) when an event message is displayed.
n 2 Sounds: Warning
n 3 Sounds: Error
The acoustic alarm is switched off with the factory default settings.
Backlight
n off
n automatic: Switches on for 30 seconds when a button is pushed
n Grid feed: (factory setting)
– Not feeding: Switches on for 30 seconds when a button is pushed; then switches off
– Feeding: Switches on for 30 seconds when a button is pushed; then dims
EN
747.431 | Z09.3 | 2017-09-05
20