User manual

StecaGrid 2500/x StecaGrid 3010/x

Maximum start voltage 600 V

Maximum input voltage 600 V

Minimum input voltage for grid-

feeding

125 V

Start input voltage 150 V

Rated input voltage 320 V 380 V

Minimum input voltage for rated

output

225 V 270 V

Number of MPP trackers 1

Operating input voltage range 125 ... 500 V

Maximum input current 11.5 A

Rated input current 8 A

Maximum backfeed current into

the PV generator

0 A

Maximum input power at max-

imum active output power

2,560 W 3,070 W

Rated input power (cos phi = 1) 2,560 W 3,070 W

Recommended maximum PV

power

3,100 Wp 3,800 Wp

Derating / power limiting occurs automatically when:

n input power > max. recommended PV power

n Cooling is inadequate

n Input current too high

n Grid current too high

n Internal or external power reduction

n Grid frequency too high (in accordance with country set-

ting)

n Limiting signal on external interface

n Output power limited (set on the inverter)

AC output side (grid connection)

Output voltage 185 V ... 276 V (depending on the country settings)

Rated output voltage 230 V

Maximum output current 14 A

Rated output current 11 A 13 A

Maximum active power (cos phi

= 1)

2,500 W 3,000 W

747.431 | Z09.3 | 2017-09-05