User Manual

Quick Release

Stedi Stock Item

# 1201or 1211

Attachment Handle

Strap Lug

Nut: To attach

Handle when no

Optical Device is

attached

The Stedi Stock ® is an ultra Light Weight Shoulder brace for Cameras,

Range Finders, Spotting Scopes & Video Cameras.

Instructions: Remove the Nut from the threaded rod atop the handle,

Insert the threaded rod through one of the three holes in the stock

(depending upon eye relief required) Attach the desired optical device

to the threads protruding through the stock and use the handle to

tighten to the desired tension.

NOTE: Stedi-Stock® is designed to attach to any optical

device with a standard 1/4x20 threaded receptacle. Nut is

provided to keep the handle attached to the stock when not

mounted to an optical device.

PAGE 1
Stedi Stock Item # 1201or 1211 Nut: To attach Handle when no Optical Device is attached Strap Lug Attachment Handle Strap Lug Quick Release The Stedi Stock ® is an ultra Light Weight Shoulder brace for Cameras, Range Finders, Spotting Scopes & Video Cameras.
PAGE 2
Strap Installation Instructions for Stedi Stock and Stedi Stock II: Item #’s 1201-1211-1221-1231 Strap: Loop free end of strap through the strap lug , slide free end of strap through buckle as shown and adjust for desired length. NOTE: Stedi-Stock® is designed to attach to any optical device with a standard 1/4x20 threaded receptacle.