— C ATA LO G Steel City® Hangers, clamps & fasteners
— Thomas & Betts is now ABB Installation Products, but our long legacy of quality products and innovation remains the same. From connectors that help wire buildings on Earth to cable ties that help put machines in space, we continue to work every day to make, market, design and sell products that provide a smarter, safer and more reliable flow of electricity, from source to socket.
— Table of contents 004 – 005 Overview 006 – 017 Beams and Purlin clamps 018 –021 Hangers 022 – 037 Conduit and cable supports 038 – 054 Stud wall/drywall supports, clips and brackets 055 – 063 Acoustical tee supports, clips and brackets 064 – 069 Low-voltage/datacom hooks, hangers and brackets 070 – 077 Fastener accessories and hardware 078 – 079 Notes
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Steel City® hangers, clamps & fasteners Overview — Materials — Finishes The following materials are used for Steel City® spring steel fasteners: • High-carbon spring steel Spring steel products are manufactured using high-carbon cold-rolled steel, AISI C1075 or equivalent. The final part is heat treated to give the formed product great resilience and strength.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S – O V E R V I E W 5 — Individual part numbering system SSF – Prefix See note 1 H A 1/4 Style See note 3 Product category See note 2 Beams and Purlin Hangers C – Conduit and cable Stud wall and drywall Acoustical tee Low-voltage/telecom Miscellaneous T Part size See note 4 B H C S T V M Additional feature See note 5 The part has an attached stud S The part has a thread impression T Adjustable A Notes 1.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Beam and Purlin clamps Beam clamps — Beam clamps Cat. no. Fig. 1 Fig. 2 Fig. 3 Fig no.
BEAM AND PURLIN CL AMPS – BEAM CL AMPS 7 — Beam and Purlin clamps Beam clamps — Beam clamps Cat. no. Fig. 1 Fig. 2 Fig no. O.D. of conduit or pipe (in) OM. conduit or pipe size (in) STD CTN 50 RCS Clamp — Steel RCS-1/2 1 .840 1⁄2 RCS-3/4 1 1.050 3⁄4 50 RCS-1 1 1.315 1 100 RCS-1-1/4 1 1.660 11⁄4 100 RCS-1-1/2 1 1.900 2 100 RCS-2 1 2.375 2 100 RC Clamp — Malleable Iron Fig. 3 RC-3/8 1 .675 3⁄8 50 RC-1/2 1 .840 1⁄2 50 RC-3/4 1 1.050 3⁄4 50 RC-1 1 1.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Beam and Purlin clamps 6H series conduit and pipe hangers • Accommodates 1⁄2" through 4" EMT or rigid conduit • Can be used for either vertical or horizontal installation • 6HTB Series have a built-in nut so there are less parts to handle or drop • Installs easily with a screwdriver — 6H series conduit and pipe hangers With bolt Cat. no. Fig. 1 Fig. 2 Fig. 3 6H0 B Without bolt Fig no. 1 Cat. no. 6H0 Fig no.
BEAM AND PURLIN CL AMPS – BEAM CL AMPS 9 — Beam and Purlin clamps Beam clamps • Supports threaded rod, threaded bridle rings and electrical boxes • Bright zinc plating • Supports 100 lbs. static load limit — Beam clamps – Malleable iron, electro-plated finish Cat. no. Fig. 1 Fig. 2 Fig no.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S 10 — Beam and Purlin clamps Beam clamps — Beam clamps – Malleable iron, silver electro-plated finish Base size (in) Cat. no.
BE AM AND PURLIN CL AMPS – HAMMER- ON FL ANGE CLIPS 11 — Beam and Purlin clamps Hammer-on flange clips • Hangs on box from the underside or to the front of beam flanges • When used with combination conduit hanger, the conduit run lines up with knockouts in outlet box and eliminates offsets and bends • 1⁄4–20 threaded opening • Also available with staked stud, 1⁄4–20 x 3⁄8", to provide easier attachment of outlet boxes to beams — eliminates having to use loose screws • Supports 100 lbs.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Beam and Purlin clamps Hammer-on flange clips (continued) • Clips fit most bulb tees and beam flanges • 1⁄4" hole provided • Installs easily with a hammer — Hammer-on flange clips Cat. no. Fig. 1 Fig. 2 Fig no.
BEAM AND PURLIN CL AMPS – Z PURLIN CLIPS 13 — Beam and Purlin clamps Z Purlin clips SSF-BA Series • Fits Z Purlin flanges 1⁄16" to 1⁄4" • Riveted combinations support wire, rod or threadedrod from Z Purlin • Compensates for the angle of the Purlin design • Supports 100 lbs. static load limit • Installs easily with hammer — Z Purlin clips — SSF-BA Series Cat. no. Fig. 1 Fig. 2 Fig. 3 Fig no.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Beam and Purlin clamps Z Purlin clips SSF-BZ1/SSF-BZ2 Series • Compensates for angle of Purlin • Provides method for running conduit parallel to Purlin • Fits Z Purlin thicknesses up to 3⁄32" • Supports 100 lbs. static load limit • •Installs easily with a hammer — Z Purlin clips — SSF-BZ1/SSF-BZ2 Series Cat. no. Fig. 1 Fig. 2 Fig no.
BE AM AND PURLIN CL AMPS –Z PURLIN CLIPS 15 — Beam and Purlin clamps Z Purlin clips SSF-BZ1-A/SSF-BZ1-B Series • Compensates for angle of Purlin • Provides method for running conduit parallel to Purlin • Fits Z Purlin thicknesses up to 3⁄32" • Supports 100 lbs. static load limit • Installs easily with a hammer — Z Purlin clips — SSF-BZ1-A/SSF-BZ1-B Series Cat. no. Fig. 1 Fig. 2 Fig no.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Beam and Purlin clamps Z Purlin clips SSF-BZ2-A/SSF-BZ1-C Series • Compensates for angle of Purlin • Provides method for running conduit parallel to Purlin • Fits Z Purlin thicknesses up to 3⁄32" • Supports 100 lbs. static load limit for C series and 25 lbs. for S series • Installs easily with a hammer — Z Purlin clips — SSF-BZ2-A/SSF-BZ1-C Series Cat. no. Fig. 1 Fig. 2 Fig no.
BEAM AND PURLIN CL AMPS – C PURLIN CLIPS — Beam and Purlin clamps C Purlin clips • Two sizes of C Purlin clips to cover larger range of vertical flange sizes • Riveted combinations support wire, rod or threaded rod from bar joist, C Purlin • Supports 160 lbs. static load limit • Installs easily with a hammer — C Purlin clips Cat. no. Fig. 1 Fig. 2 Fig no.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Hangers Plain and threaded rod hangers • Used to suspend #8 wire, 1⁄4" or 3⁄8" plain rod or 1⁄4" or 3⁄8" threaded rod from beam flanges 1⁄8" to 3⁄4" thick • Supports 200 lbs. static load limit • Installs easily with a hammer — Plain and threaded rod hangers Cat. no. Fig. 1 Fig no.
HANGERS – STR AP HANGER CLIPS — Hangers Strap hanger clips • • • • Accepts strap widths up to 11⁄8" Can be attached to a wide variety of products Supports 100 lbs. static load limit Clips are made from galvanized steel — Strap hanger clips Fig. 1 Fig. 2 Fig. 3 Fig. 4 Description Static load limit (lbs) STD CTN Cat. no. Fig no.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Hangers Rod and wire hangers • Offset bracket suspends plain rod, threaded rod or wire drops from laminated wood or concrete beams, joists, ceilings and walls • Angle bracket suspends plain rod, threaded rod or wire drops from laminated wood or concrete beams, joists, ceilings and walls • Supports 160 lbs. static load limit — Rod and wire hangers Cat. no. Fig. 1 Fig no.
HANGERS – MISCELL ANEOUS HANGERS — Hangers Miscellaneous hangers • Rod hanger available for 1⁄4" and 3⁄8" threaded rod with or without thread impression — Miscellaneous hangers Cat. no. Fig. 1 Fig. 3 Fig. 5 Fig. 7 Fig. 2 Fig. 4 Fig. 6 Fig no.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Conduit and cable supports Conduit clips • Available for 3⁄8" through 2" trade sizes for EMT, flexible conduit and MC/AC cable • Available with either a plain hole for 1⁄4" bolt or a 1⁄4–20 thread impression • Shape of clip and clasp mechanism enables hand installation (no tools needed) • Unique clasp design has an aggressively angled tab and receiving hole to provide consistent, easy clasping of the clip • Supports 100 lbs.
CONDUIT AND C ABLE SUPPORTS – CONDUIT CLIPS — Conduit and cable supports Conduit clips • Available for 1⁄2" through 1" EMT and rigid conduit • Available with either a plain hole for 1⁄4" bolt or a 1⁄4 –20 thread impression • Supports ultimate static load limit of 25 lbs. in the vertical position • Supports ultimate static load limit of 15 lbs. in the horizontal position — Conduit clips Cat. no. Fig. 1 Fig no.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Conduit and cable supports Flange-mount conduit clips • Available with spring steel conduit clip, bottom mounted or side mounted • Available for 3⁄8" through 2" trade sizes for EMT, rigid, flexible conduit and MC/AC cable • Fits beam flanges 1⁄8" through 3⁄4" thick • Will pivot through 360° • Fig. 1 supports 75 lbs. static load limit • Fig. 2 supports 25 lbs.
CONDUIT AND C ABLE SUPPORTS – FL ANGE- MOUNT SNAP- IN CONDUIT CLIP — Conduit and cable supports Flange-mount snap-in conduit clip • Available with spring steel conduit clip, bottom mounted or side mounted • Available for 1⁄2" through 1" EMT and rigid conduit • Fits beam flanges 1⁄8" through 3⁄4" thick • Will pivot 360° • Fig. 1 supports 25 lbs. static load limit • Fig. 2 supports 15 lbs. static load limit • Requires only hammer to install — Flange-mount snap-in conduit clip Cat. no. Fig. 1 Fig.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Conduit and cable supports Multi-function utility clip from drop wire or flange • • • • • Attaches to #12 wire through 3⁄8" rod Fits 1⁄8" to 3⁄8" flanges Provides attachment for conduit and boxes Supports #10-24 and 1⁄4–20 threaded bridle rings Assemblies support 1⁄2", 3⁄4" and 1" EMT and rigid conduit • Also attaches to 1⁄4" and 3⁄8" threaded rod — Multi-function utility clip from drop wire or flange Description Static load limit
CONDUIT AND C ABLE SUPPORTS – C ABLE FROM DROP WIRE SUPPORT — Conduit and cable supports Cable from drop wire support • • • • Exclusive slot keeps drop wire centered Will not bend or deform drop wire Delivers faster installation Supports MC/AC, 14-2 through 12-3 cable and 1⁄2" EMT (.433"–.706" O.D.) from #8–#12 wire and 1 ⁄4" plainand threaded rod • Eliminates the need to trap cable against drop wire • Supports 25 lbs. static load limit • No tools required — Cable from drop wire support Cat. no. Fig.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S 28 — Conduit and cable supports Conduit hangers from flange, wire or rod B A • CK Series attaches conduit (EMT, Rigid, ENT and Aluminum) to drop wire, rods or flanges • Application A (vertical flange) supports 25 lbs. static load limit • Application B (horizontal flange) supports 100 lbs. static load limit • Application C (vertical drop wire) supports 50 lbs. static load limit C — Conduit hangers from flange, wire or rod Fig no.
CONDUIT AND C ABLE SUPPORTS – FLE XIBLE CONDUIT HANGERS FROM DROP WIRE — Conduit and cable supports Flexible conduit hangers from drop wire • One-piece construction • Can be used in vertical or horizontal positions • Fits 14-2 through 12-3 armored cable (.433"–.535" outer diameter) • No load rating — for positioning only • No installation tools required — Flexible conduit hangers from drop wire Cat. no. Fig. 1 SSF-CK535 Fig no. 1 Description Flexible conduit hanger from drop wire, #8–#12 wire, .
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Conduit and cable supports Cable snap clip • Supports cable from 1⁄16"–1⁄2" flange • Works with MC and AC cable dimensions .178" to 1.250" • Snaps easily onto flange • Cable snaps right into fastener • No load rating — for positioning only • Installs easily with a hammer — Cable snap clip Cat. no. Fig. 1 Fig. 2 Fig. 3 Fig no. Cable O.D. (in) Flange thickness (in) STD CTN SSF-CES218 1 .178–.
C O N D U I T A N D C A B L E S U P P O R T S – F L E X I B L E C O N D U I T TO M E TA L S T U D — Conduit and cable supports Flexible conduit to metal stud • Provides quick attachment for MC or AC to metal stud • No load rating — for positioning only • No tools required — Flexible conduit to metal stud Cat. no. Fig. 1 SSF-CM535 Fig no. 1 Description MC/AC cable to metal stud clip, 14-2 through 12-3 cable (.433"–.535" O.D.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Conduit and cable supports Flexible conduit and cable hanger • Effectively supports three runs (CW3) or six runs (CW6) of MC/AC cable • Can also be used like a bridle ring to support all types of low-voltage cabling • Locking hook contains cables inside the loop — Flexible conduit and cable hanger Fig no. No.
C O N D U I T A N D C A B L E S U P P O R T S – L I G H T W E I G H T T R A P E Z E & C O N D U I T-TO - C O N D U I T C L I P S — Conduit and cable supports Lightweight trapeze & conduit-to-conduit clips Lightweight trapeze • Back-to-back conduit clips for individual use • Available for 3⁄8" through 2" sizes for EMT, rigid or flexible conduit and MC/AC cable • For use as lightweight trapeze, total load limit is 100 lbs. • Clips for vertical use, static load limit 100 lbs.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Conduit and cable supports Support box and conduits from single-drop wires, rods and flanges • Supports conduit on both sides of a junction box • Holes in opposite ends of 18" bar accommodate CC and CS Series conduit clips • A center hole accepts BH flange clips and CVC utility clip fasteners for attachment to threaded rod — Support box and conduits from single-drop wires, rods and flanges Cat. no. Fig. 1 Fig. 2 Fig. 3 Fig no.
C O N D U I T A N D C A B L E S U P P O R T S – M C /A C C A B L E — F L E X I B L E C O N D U I T — Conduit and cable supports MC/AC cable — Flexible conduit • Clips available for one-, two- or four-cable runs • The standard CR2 part can be broken apart to create two single-cable run clips • Mounting holes available for mounting flat or perpendicular to stud or flange • Mounting clips for quick attachment to metal studs • Sturdy design provides firm support of attached cable — MC/AC Cable — Flexible
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Conduit and cable supports Nailing bracket • Attach conduit to steel, concrete or wood • FB Series can be used to avoid offset bends when used with 11⁄2" deep boxes • OB Series can be used to avoid offset bends when used with 21⁄8" deep boxes — Nailing bracket Cat. no. Fig. 1 Fig. 2 Fig. 3 Fig no.
C O N D U I T A N D C A B L E S U P P O R T S – C A B L E T I E FA S T E N E R S — Conduit and cable supports Cable tie fasteners • Secures MC/AC cable bundles and Telecom cable bundles • 11" cable tie included — Cable tie fasteners Cat. no. Fig. 1 Fig. 3 Fig. 2 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig no.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Stud wall/drywall supports, clips and brackets Cable support • Supports up to four runs of MC and AC cable and up to six runs of non-metallic sheathed cable • Installs with nails, staples or sheet metal screws • Complies with NEC® Section 300.4 for all wood and metal studs • Made with high-strength plastic — Cable support Cat. no. Fig. 1 SSF-SC6 Fig no.
STUD WALL/DRY WALL SUPPORTS, CLIPS AND BR ACKETS – SCRE W- ON CONDUIT SUPPORT 39 — Stud wall/drywall supports, clips and brackets Screw-on conduit support • Supports 1⁄2" and 3⁄4" EMT conduit and MC/AC cable • Works with wood or metal stud • Preset bend provides alignment with knockouts for 11⁄2" deep boxes or 21⁄8" deep boxes — Screw-on conduit support Cat. no. Fig. 1 Fig no.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Stud wall/drywall supports, clips and brackets Snap-on box clip • • • • • • • Fits most electrical boxes requiring plaster rings Fits most metal stud sizes Will not move on stud Wider part for more secure fastening No screws required Support leg braces box against stud Installs easily with a hammer — Snap-on box clip Fig no.
S T U D W A L L / D R Y W A L L S U P P O R T S , C L I P S A N D B R A C K E T S – FA R - S I D E B OX S U P P O R T 41 — Stud wall/drywall supports, clips and brackets Far-side box support • Provides side support for electrical boxes • Works with most electrical boxes for 21⁄2", 31⁄2" and 4" metal stud depths — Far-side box support Cat. no. Fig. 1 Fig. 2 Fig. 3 Fig no.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Stud wall/drywall supports, clips and brackets Switch box or conduit to metal stud • Attaches securely to most metal stud sizes • Adjustable offset enables the box to protrude through drywall sizes: 1⁄4", 3⁄8", 1⁄2", 5⁄8" or 3⁄4" • Riveted to accommodate your drywall requirements — Switch box or conduit to metal stud Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Cat. no. Fig no.
STUD WALL/DRY WALL SUPPORTS, CLIPS AND BR ACKETS – MOUNTING BR ACKET — Stud wall/drywall supports, clips and brackets Mounting bracket • Attaches 4" and 411⁄16" electrical boxes to metal stud • Support leg can be attached to stud to eliminate movement of box in wall • Attaches to metal or wood stud using self-tapping screws and screw gun or nails • One part mounts boxes for 11⁄2", 21⁄2", 31⁄2", 4" and 6" stud, which means less inventory • SH4 and SH6 brackets available specifically for 4" and 6" studs,
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Stud wall/drywall supports, clips and brackets Screw gun box bracket • Self-tapping screws are aligned with the dimples so that the box is straight • Enables mounting of multiple boxes • Preset for metal stud 16" or 24" on center • Depth set for 11⁄2"- or 21⁄8"-deep electrical box • Installs easily with a screw gun • SGP and SGA brackets have adjustable tabs for 11⁄2" or 21⁄8" deep boxes • SGA brackets adjustable for non-standard stud
S T U D W A L L / D R Y W A L L S U P P O R T S , C L I P S A N D B R A C K E T S – B OX M O U N T I N G B R A C K E T S — Stud wall/drywall supports, clips and brackets Box mounting brackets for between studs • Supports electrical boxes, plaster rings or lowvoltage devices from one bracket • Accommodates 4" or 411⁄16" boxes • Bendable leg serves as a bracket stabilizer • SB16F and SB24F flat versions enable mounting for any stud spacing, from 4" to 24" • SB brackets enable box mounting in all four 90°
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Stud wall/drywall supports, clips and brackets Extension plate bracket • Improved bracket with bendable stabilizer leg for use on 21⁄2" and 31⁄2" metal studs • Mounts outlet boxes 12" or 18" offset from either a metal stud track or a stud • When mounted, drywall ring is brought to within 1⁄6" of drywall every time and will not bulge or break-out drywall • Mounts 4" or 411⁄16" outlet boxes, 11⁄2" or 21⁄8" deep • The SSF-S6X extender wo
S T U D W A L L / D R Y W A L L S U P P O R T S , C L I P S A N D B R A C K E T S – S W I TC H B OX B R A C K E T — Stud wall/drywall supports, clips and brackets Switch box bracket • Fits 2" x 3" switch boxes with one or two screw plaster ears • Uses one bracket on 21⁄2" and 31⁄2" metal studs • Bracket can be piggy-backed on same side of metal stud (singly or any number in series), giving greater flexibility to installer • Brackets can be mounted on both sides of metal stud for double mounting • Will
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Stud wall/drywall supports, clips and brackets Floor-mounted box supports • Mounts on metal or wood studding • Used as conduit rack or spacer for rigid conduit, IMC or EMT • Ideal for schools, hospitals, industrial and commercial jobs • Galvanized steel — Floor-mounted box supports Cat. no. Fig. 1 Fig no.
S T U D W A L L / D R Y W A L L S U P P O R T S , C L I P S A N D B R A C K E T S – E A S Y- S N A P G R O M M E T — Stud wall/drywall supports, clips and brackets Easy-snap grommet • Fits any size or shape metal stud hole • Provides complete 360° protection for cable — Easy-snap grommet Fig no. Description STD CTN 1300 1 Plastic bushing for metal stud, 1" trade size opening (111⁄32") 100 1216-EN 2 2" Twisted universal bushing for metal stud, polypropylene material 50 Cat. no. Fig. 1 Fig.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Stud wall/drywall supports, clips and brackets Through-stud cable/conduit support • A quick means of support for horizontal runs of conduits or MC/AC through metal stud • Installs easily with a screw gun • SSF-SP1 enables ENT conduit and MC/AC cable to be easily pulled through metal stud — Through-stud cable/conduit support Cat. no. Fig. 1 Fig. 2 Fig. 3 † Requires self-tapping screws to install Fig no.
S T U D W A L L / D R Y W A L L S U P P O R T S , C L I P S A N D B R A C K E T S – LO W - V O LTA G E M O U N T I N G B R A C K E T S 51 — Stud wall/drywall supports, clips and brackets Low-voltage mounting brackets — screw-on support • Eliminates the need for an electrical box when installing low-voltage Class 2 wiring • For old work or new work — Low-voltage mounting brackets — screw-on support Fig. 1 Cat. no. Fig no. SSF-SLV VN1 Fig. 3 Fig.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Stud wall/drywall supports, clips and brackets Device leveler and retainer • • • • Use for oversided drywall openings Prevents broken cover plates Stops device from being pushed back in wall Makes floating device rigid — Device leveler and retainer Cat. no. Fig. 1 SSF-SR Fig no.
S T U D W A L L / D R Y W A L L S U P P O R T S , C L I P S A N D B R A C K E T S – O L D W O R K B OX S U P P O R T — Stud wall/drywall supports, clips and brackets Old work box support • Quickly attaches box through finished drywall • For up to 11⁄2" thick drywall • New 820D shipped in one piece, break-apart design • Easy to install — Old work box support Cat. no. Fig. 1 820-D Fig no.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Stud wall/drywall supports, clips and brackets Protector plates • Protects cable(s) from damage when installing drywall or paneling • No nails or screws required • Fits all stud sizes • Both products meet requirements for NEC® Section 300.4 • SSF-ST66 legs are crimped with pliers to stud to provide secure fit — Protector plates Fig no.
A C O U S T I C A L T E E S U P P O R T S , C L I P S A N D B R A C K E T S – S N A P - O N B OX H A N G E R — Acoustical tee supports, clips and brackets Snap-on box hanger • Enables positioning of fixture or box anywhere across a 24" span • Hanger comes complete with THC box mounting clip and 1⁄4–20 screw • Drop wire holes in tee clips and the clip enable support from main structure • Part includes dual-height feature which enables 11⁄2"-deep electrical box to be mounted flush with tile or offset 3⁄4
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Acoustical tee supports, clips and brackets Suspension bars for Lightolier® Calculite® series fixtures & Light fixture support clips • Reduces installation time • Hanger comes complete with bar riveted to acoustical tee clip, additional acoustical tee clip and 1⁄4–20 screw • Position of fixture adjustable with span • Solid bar for sturdier installation • Installs easily with a screwdriver — Suspension bars for Lightolier® Calculite®
ACOUSTIC AL TEE SUPPORTS, CLIPS AND BR ACKETS – INDEPENDENT SUPPORT CLIPS — Acoustical tee supports, clips and brackets Independent support clips • • • • • Easy to assemble, one-piece construction Provides independent support for fixtures Washer wing nut included Static load limit 65 lbs. No installation tools required — Independent support clips Cat. no. Fig. 1 Fig no.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S 58 — Acoustical tee supports, clips and brackets Electrical component supports • Provides supporting conduit and outlet boxes above acoustical tee bar • TCH and TCV Series provide both horizontal and vertical support • Available with 1⁄4–20 thread impression or plain hole • No installation tools required — Electrical component supports Cat. no. Fig. 1 Fig. 3 Fig. 5 Fig. 2 Fig. 4 Fig. 6 Fig no.
A C O U S T I C A L T E E S U P P O R T S , C L I P S A N D B R A C K E T S – A DJ U S TA B L E B OX A N D C O N D U I T B R A C K E T 59 — Acoustical tee supports, clips and brackets Adjustable box and conduit bracket • Supports boxes and conduit above acoustical tee with height adjustments from 41⁄4" through 71⁄4" • Attaches to conduit clips with thread impressions at required height • Assemblies available for preset conduit l ocations • TA7-S assemblies are furnished with the TA7 bracket, the conduit
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Acoustical tee supports, clips and brackets Drop rod stabilizer • Provides attachment for dedicated electrical drop wire • Yellow painted finish for easy identification • Compliant with NEC® Section 300.4(A) for supporting end of dedicated drop wire — Drop rod stabilizer Cat. no. Fig. 1 Fig no.
A C O U S T I C A L T E E S U P P O R T S , C L I P S A N D B R A C K E T S – A C O U S T I C A L T E E T W I S T- O N C L I P — Acoustical tee supports, clips and brackets Acoustical tee twist-on clip for fixture support • Will not damage acoustical tee • All T-clips with 1⁄4–20 studs are furnished with a TWN-1/4" wing nut • All T-clips with #8–32 studs are furnished with a #8–32 pal nut • Available in black or white painted finish • Static load limit 25 lbs.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Acoustical tee supports, clips and brackets Acoustical tee twist-on fixture support • Supports electrical fixtures from acoustical tee bar 15⁄16" wide • 1⁄4"–20 stud — 5⁄8", 11⁄2", 2" or 3" long • All T-Clips with 1⁄4"-20 studs furnished with • TWN-1 ⁄4" wing nut • All T-Clips with #8-32 studs furnished with #8-32 pal nut • No installation tools required — Acoustical tee twist-on fixture support Cat. no. Fig. 1 Fig. 2 Fig no.
ACOUSTIC AL TEE SUPPORTS, CLIPS AND BR ACKETS – LIGHT FIX TURE HANGER — Acoustical tee supports, clips and brackets Light fixture hanger • Supports fluorescent light fixtures from S-hooks and jack chain (see page 73) • Supports 50 lbs.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Low-voltage/datacom hooks, hangers and brackets Cable support hooks • Extra-wide base provides cable support on a flat surface, eliminating kinking, bending and crimping • Accommodates Category 5 fiber optic cable and innerduct • Available in 15⁄16" and 2" diameter size cable support hook • Complies with UL, CSA, NEC® and EIA/TIA requirements for structured cabling systems • Supports 50 lbs.
LO W - V O LTA G E / D ATA C O M H O O K S , H A N G E R S A N D B R A C K E T S – C A B L E S U P P O R T H O O K S — Low-voltage/datacom hooks, hangers and brackets Cable support hooks • Extra-wide base provides cable support on a flat surface, eliminating kinking, bending and crimping • Accommodates Category 5 fiber optic cable and innerduct • Available in 15⁄16" and 2" diameter size cable support hook • Complies with UL, CSA, NEC® and EIA/TIA requirements for structured cabling systems • Supports 1
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Low-voltage/datacom hooks, hangers and brackets Deltec® tie cable support fasteners • Ideal for attachment of high-performance cable such as fiber optic and CAT5 cables because of the wide strap used for support of the cable bundle • Preassembled part combinations enable quick installation to vertical and horizontal flanges, Purlin, drop wire, threaded rod and acoustical tee bar • Can be used for single or multiple bundles • Fully adj
LO W - V O LTAG E / D ATACO M H O O K S , H A N G ER S A N D B R AC K E T S – LO O P T I E C A B L E S U P P O R T FA S T EN ER S — Low-voltage/datacom hooks, hangers and brackets Loop tie cable support fasteners • Attachment of all types of MC/AC cable and high-performance cable such as fiber optic and CAT5 cables • Preassembled part combinations enable quick installation to vertical and horizontal flanges, purlin, drop wire, threaded rod and acoustical tee bar • The hook-and-loop type strap makes mou
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Low-voltage/datacom hooks, hangers and brackets Threaded bridle rings • Bridle rings can be combined with these other Steel City® Spring Steel Fastener products: BBC Beam Clamp, BH Series Flange Clips and TC Series Acoustical Tee • Bright zinc electro-plated finish — Threaded bridle rings Cat. no. Fig. 1 Fig. 2 Fig no. Eye dia. (in) Thread Description Max.
LO W - V O LTAG E / D ATACO M H O O K S , H A N G ER S A N D B R AC K E T S – LO W - V O LTAG E M O U N T I N G B R AC K E T 69 — Low-voltage/datacom hooks, hangers and brackets Low-voltage mounting brackets — screw-on support • Eliminates the need for an electrical box when installing low-voltage Class 2 wiring • For old work or new work — Low-voltage mounting brackets — screw-on support Fig. 1 Cat. no. Fig no.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Fastener accessories and hardware Miscellaneous hangers • Rod hanger available for 11⁄4" and 3⁄8" threaded rod with or without thread impression — Miscellaneous hangers Cat. no. Fig. 1 Fig. 2 Fig no.
FA S T E N E R A C C E S S O R I E S A N D H A R D W A R E – M I S C E L L A N E O U S H A N G E R S — Fastener accessories and hardware Miscellaneous hangers • Rod hanger available for 1⁄4" and 3⁄8" threaded rod with or without thread impression • Various steel brackets with 11⁄4" holes and galvanized finish — Miscellaneous hangers Description Static load limit (lbs) STD CTN 1 Offset bracket with 1⁄4" hole 160 100 2 Angle bracket with 1⁄4" hole 160 100 SSF-HSAB 3 Short angle bracket wit
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Fastener accessories and hardware Pipe sleeve positioner — Pipe sleeve positioner Fig no. Sleeve dia. (in) SSF-MPS 1 SSF-MPS 1 SSF-BF1/2 2 SSF-BF1/2 SSF-BF3/4 Cat. no. Fig. 1 Fig. 2 Description/wall thickness STD CTN All dia.
FA S T E N E R A C C E S S O R I E S A N D H A R D W A R E – S - H O O K A N D J A C K C H A I N — Fastener accessories and hardware S-hook and jack chain • Order S-hooks and jack chain with your Spring Steel orders to save on freight, energy and purchase orders • S-hook supports 29 lbs. static load limit — S-hook and jack chain Cat. no. Fig. 1 Fig. 2 Fig no.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Fastener accessories and hardware Signal reference grid wire clamp • Supports signal reference grid wires below computer-room floors • One fastener supports wire sizes #8 stranded (.146") to #4 stranded (.
FA S T E N E R A C C E S S O R I E S A N D H A R D W A R E – D E C K H A N G E R — Fastener accessories and hardware Deck hanger • Easy method to hang items below decking • Requires pre-drilled hole, 1⁄4" diameter • Works for material thicknesses up to 1⁄8" — Deck hanger Cat. no. Fig. 1 SSF-MNH Fig no.
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S — Fastener accessories and hardware Hardware components & R-Series continuous thread rod – galvanised — Hardware components Cat. no. Fig. 1 Fig no. Description STD CTN E142-1/4x075EG 1 1⁄4–20 x 3⁄4" hex head bolt 50 E142-1/4x100EG 1 1⁄4–20 x 1" hex head bolt 50 E142-1/4x150EG 1 1⁄4–20 x 11⁄2" hex head bolt 50 E145-1/4EG 2 1⁄4–20 x 1⁄4" hex nut 100 SSF-MH1/4-3/8 3 1⁄4–20 x 3⁄8" bolt combo head 100 Fig. 2 Fig.
— Notes S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S
N OT E S 79
S T E E L C I T Y ® H A N G E R S , C L A M P S & FA S T E N E R S Additional information We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB AG does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein.
— US ABB Installation Products Electrification Products division 860 Ridge Lake Blvd. Memphis, TN 38120 +1 901-252-5000 © Copyright 2018 ABB. All rights reserved. Specifications subject to change without notice. 9AKK107046A5711 21.09.2018 tnb.abb.
