Cut Sheet

eFab Components
6
Floor Mount T Bracket
Consistent box locations and
boxheight…everytime
Consistency results in efficiency and labor savings on the
job. With three fixed box locations and a fixed height of 18",
the Steel City
®
Pre-Fab T Bracket provides a consistent
installation every time. For added efficiency, the bracket
includes integral mounting screws that help reduce
installation time. A handy locator tab at the base of the
bracket saves you the time of looking for installed boxes that
have been hidden by wall coverings. The base also features
unique floor track tabs. The inner tab slides in front of the
floor track, and the two outer tabs slide behind the floor track
to provide stability when positioning the bracket.
Floor Mount T Bracket
Cat. No. Description
Std. Pkg.
Quantity
UPC Number
H16V18S Pre-Fab T Bracket 10 785991-04801
3 Fixed Box Locations
Each accommodates both
4" & 4
11
⁄
16
" boxes
18" Fixed Height
16" Fixed Width
Integral Mounting Screws
Reduce installation time
Mud Ring Mounting
Screw Holes
For low-voltage applications
where no box is required
Key Hole Slots
Maintain box position
if mud ring is removed
Floor Track Tabs
Provides stability when
positioning the bracket
Locator Tab
Helps locate installed boxes
hidden by wall coverings
Stability Ridges
For added support
Extension Plate Bracket
• Improvedbracketwithbendablestabilizerlegforuseon
2½" and 3½" metal studs
• Mountsoutletboxes12"or18"offsetfromeitherametal
stud track or a stud
• Whenmounted,drywallringisbroughttowithin" of
drywall every time and will not budge or break out drywall
• Mounts4"or4⁄" outlet boxes, 1½" or 2" deep
• SV18providescompliancewithAmericanswithDisabilities
 Act(ADA)requirements
Extension Plate Bracket
Cat. No. Description Std. Ctn.
SSF-SV12 Extension plate bracket, 12" height 50
SSF-SV18 Extension plate bracket, 18" height 50
SSF-SV18