Specification

Section 28 0528.33
DEVICE BOXES FOR ELECTRONIC SAFETY AND SECURITY
28 0528.33 - 6
REFERENCES above, as well as local codes which may specify additional grounding and/or bonding
requirements.
1. Bond metallic raceway together and ensure that bonding breaks through paint to bare metallic
surface of painted metallic hardware.
3.5 PROTECTION
A. Provide final protection and maintain conditions, in a manner acceptable to manufacturer and in
accordance with accepted industry practice, that ensure coatings, finishes, and cabinets are without
damage or deterioration at the time of Substantial Completion.
1. Repair damage to galvanized finishes with zinc-rich paint recommended by manufacturer.
2. Repair damage to PVC or paint finishes with matching touchup coating recommended by
manufacturer.
3.6 CLEANING
1. On completion of installation, including outlet fittings and devices, inspect exposed finish.
Remove burrs, dirt, and construction debris and repair damaged finish, including chips, scratches,
and abrasions.
END OF SECTION