Specification

ManualsBrandsSteel City ManualsCovers2-Gang Steel Box Extension Ring 1/4 in. Raise (20 per Case)

Section 27 0528.33

DEVICE BOXES FOR COMMUNICATIONS SYSTEMS

27 0528.33 - 4

a. Opening (Interior) Dimensions:

1) 3.85 in (97.8 mm) Width

2) 3.85 in (97.8 mm) Height

b. 5 Square® by 4 Square Extension Rings shall be:

1) STEEL CITY 82-52E-0 (flat)

2) STEEL CITY 82-52E-1/4 (0.25 in (6.4 mm) depth)

3) STEEL CITY 82-52E-1/2 (0.5 in (12.7 mm) depth)

4) STEEL CITY 82-52E-5/8 (5/8 in (15.9 mm) depth)

5) STEEL CITY 82-52E-3/4 (3/4 in (19.1 mm) depth)

6) STEEL CITY 82-52E-1 (1.0 in (25.4 mm) depth)

7) STEEL CITY 82-52E-1-1/4 (1.25 in (31.8 mm) depth)

8) STEEL CITY 82-52E-1-1/2 (1.5 in (38.1 mm) depth)

3. 5 Square® by 1-gang Extension Rings

a. Oversized Opening (Interior) Dimensions:

1) 2.0 in (50.8 mm) Width

2) 3.03 in (77.0 mm) Height

b. 5 Square® by 1-gang Extension Rings shall be:

1) STEEL CITY 82C-1G-0 (flat)

2) STEEL CITY 82C-1G-1/4 (0.25 in (6.4 mm) depth)

3) STEEL CITY 82C-1G-1/2 (0.5 in (12.7 mm) depth)

4) STEEL CITY 82C-1G-5/8 (5/8 in (15.9 mm) depth)

5) STEEL CITY 82C-1G-3/4 (3/4 in (19.1 mm) depth)

6) STEEL CITY 82C-1G-1 (1.0 in (25.4 mm) depth)

7) STEEL CITY 82C-1G-1-1/4 (1.25 in (31.8 mm) depth)

8) STEEL CITY 82C-1G-1-1/2 (1.5 in (38.1 mm) depth)

9) STEEL CITY 82C-1G-2 (2.0 in (50.8 mm) depth)

4. 5 Square® by 2-gang Extension Rings

a. Oversized Opening (Interior) Dimensions:

1) 3.665 in (93.1 mm) Width

2) 3.03 in (77.0 mm) Height

b. 5 Square® by 2-gang Extension Rings shall be:

1) STEEL CITY 82C-2G-0 (flat)

2) STEEL CITY 82C-2G-1/4 (0.25 in (6.4 mm) depth)

3) STEEL CITY 82C-2G-1/2 (0.5 in (12.7 mm) depth)

4) STEEL CITY 82C-2G-5/8 (5/8 in (15.9 mm) depth)

5) STEEL CITY 82C-2G-3/4 (3/4 in (19.1 mm) depth)

6) STEEL CITY 82C-2G-1 (1.0 in (25.4 mm) depth)

7) STEEL CITY 82C-2G-1-1/4 (1.25 in (31.8 mm) depth)

8) STEEL CITY 82C-2G-1-1/2 (1.5 in (38.1 mm) depth)

9) STEEL CITY 82C-2G-2 (2.0 in (50.8 mm) depth)

5. 5 Square® Blank Cover

a. STEEL CITY 82C-1

PART 3 - EXECUTION

3.1 GENERAL

A. Install the device box system in a manner ensuring that communications circuits, when installed, are

able to fully comply with ANSI/TIA/EIA Standards.