Selection Guide
Steel City® Box Support Covers combine a box-to-
stud mounting bracket with a device cover in one,
easy-to-use product. Designed for use with
4" square boxes, Steel City® Box Support Covers
can be used with both steel and wood studs.
Features and benefits:
• Combines cover and bracket in one component
• Available in one- and two-device versions
•
• Speeds installation time
• Needs no far side support
• Can be used with both steel and wood stud
• Can be used without a box as a low voltage
device support
•
#LR5043)
44 STEEL CITY® METALLIC BOXES & COVERS
—
Square boxes and accessories
Box support covers
—
4" Square surface covers
—
Box support covers
Cat. No.
Raised
(in.) # of Devices
Capacity
(cu. in.)
Std.
Ctn.
52CM13
RS 4
RS 11
RS 1
RS 12
RS 2
RS 13
RS 3
RS 14
RS 5
RS 15
RS 8
RS-16-CC
RS 9
RS-17-CC
RS 10
RS-18-CC RS-19-CC
52CMD17
Cat. No.
Depth
(in.)
Capacity
(cu. in.)
Dia. Hole
(in.) Description
Std.
Ctn.
For one toggle switch and one single flush receptacle
– For one toggle switch and one duplex flush receptacle
For one single and one duplex flush receptacle
– For two toggle switches
– For two duplex, flush receptacles
– For one toggle switch
For two single, flush receptacles
For one single, flush receptacle
– For one duplex, flush receptacle
—
– For one ground fault receptacle
– For two ground fault receptacles
– For one ground fault receptacle and one toggle switch
– For one ground fault receptacle and one duplex receptacle
—
Remove portion of G.F.I. receptacle ear to mount receptacle to cover. Screws captivated.