Selection Guide
When covers are required to accommodate various combinations
of devices, use the following catalog numbers plus the suffix
necessary, also indicate the sequence of devices.
• As illustrated (below), this is a 4-GCS Special for two toggle
switches on left side and two duplex receptacles on right side
EXAMPLE: 4-GCS Special 4-GC 3-GC
3-GCB
6-GC
5-GCB 4-GCS 6-GCS
55
—
Gang boxes and accessories
Multi-gang boxes and gang box partitions
—
Gang boxes and accessories
2-, 3- and 4-gang drawn-style device boxes and gang box covers
3G4D 1/2 3G4D V 1/ 2 4G4D 1/2 4G4D B 1/2 4G4D V 1/2
—
Cat. No. Gang
Depth
(in.)
Capacity
(cu. in.) Brackets
Each side Conduit
(in.)
Each end Conduit
(in.)
Std.
Ctn.
CV
–
B
CV
–
B
CV
—
Gang box covers
Cat. No.
Length
(in.)
Capacity
(cu. in.) Description Std. Ctn.
" Wide – raised
" for plaster
" centers; tapped holes in ears;
" centers to accommodate all standard receptacles and switches;
furnished with extra plugged screw holes; if these screw holes are used,
the cover will fit the next smaller size box.
" Wide – flat, blank
– –
– –
– –
– –
– –
" Wide – flat for toggle switches
–
–
–
–
–
4
11
" wide – special covers – flat to accommodate combinations of devices.
GANG BOXES AND ACCESSORIES
3G4D B 1/2