Use and Care Manual

[e-mail]
2
1-800-348-5004
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS
IMPORTANT SAFETY INFORMATION
To reduce the risks of electric shock, fire, and injury to persons, read all the
instructions before using the tool.
1. Keep the work area clean and well lighted. Cluttered benches and dark areas increase
the risks of electric shock, fire, and injury to persons.
2. Do not operate the tool in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust. The tool is able to create sparks resulting in the
ignition of the dust or fumes.
3. Keep bystanders, children, and visitors away while operating the tool.
Distractions are able to result in the loss of control of the tool.
WARNING – When using tools, basic precautions should always be followed, including
the following:
PERSONAL SAFETY
GENERAL
WORK AREA
1. Stay alert. Watch what you are doing and use common sense when operating
the tool. Do not use the tool while tired or under the influence of drugs, alcohol,
or medication. A moment of inattention while operating the tool increases the risk of
injury to persons.
2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep
hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long
hair increases the risk of injury to persons as a result of being caught in moving parts.
3. Avoid unintentional starting. Be sure the switch is off before connecting to the
air supply. Do not carry the tool with your finger on the switch or connect the tool to
the air supply with the switch on.
4. Do not overreach. Keep proper footing and balance at all times. Proper footing
and balance enables better control of the tool in unexpected situations.
7. Always wear eye protection. Wear ANSI-approved safety goggles.
8. Always wear hearing protection when using the tool. Prolonged exposure
to high intensity noise is able to cause hearing loss.
8. Wear heavy-duty work gloves during use.
5. Use safety equipment. A dust mask, non-skid safety shoes and a hard hat
must be used for the applicable conditions. Wear heavy-duty work gloves
during use.