Use and Care Manual

[e-mail]
2
1-800-348-5004
Z87
Fig.1
Fig.2
Fig.3
B
C
A
WARNING: When using pneumatic tools, bas ic safety precautions
should always be follow ed to reduce the risk of personal injury,
There are certain applications for which this tool was designed. we
strongly recommends that this tool NOT be modified and /or used for
any application other than for which it was designed. If you have any
questions relative to its application, p lease contact with our dealer.
including the following:
READ AND FOLLOW ALL INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
1. KEEP WORKING AREA CLEAN.
2. DON'T ALLOW CHILDREN KEEP AT
THE WORKING AREA.
3. USE SAFETY GLASSES.
4. U SE E A R PRO T ECT I ON .
5. DRESS SAFELY.
6. ONLY USE CLEAN, D RY AND
REGULATED
C l u t t e r e d a r e a s i n v i t e i n j u r i e s .
Don't let them
To prevent
eye injuries, the tool operator and all
persons in the w orking area must wear
s af e t y g la s s e s w i t h p e r m a ne n t l y
attac hed, rigid, plastic side shields.
These safety gla sses must co nform to
ANSI Z87.1 requirements (approved
glas
ses have “Z87” printed o r stamped
T he
working area
ma y be expos ed to high
noise levels that can lead to hearing
Protective gloves
and nonskid footwear or safety shoes
are recommended when working with
and operating this tool. Don't wear loose
clothing or jewelr y. They can get caugh t
in moving parts. Also, wear a protective
hair covering to prevent long hair from
compressed a ir at 70 to
handle the tool.
on them).
damaged.
getting caught in the tool.
120 PSI (4.8 to 8. 3 BAR) .