Installation Guide

Floating Surface Adjustable Bracket Installation Guide & Warranty Information 5

Option 1B: Mounting Bracket to Front of Cabinet with Doors

Reference the numbers below with the diagram

1 – If there is not a 2" wide surface to mount bracket on front wall, a

1"x3"x12" piece of wood can be mounted to the cabinet sidewall

several inches away from the front face. The distance from

the front face to the back side of 1"x3"x12" becomes the wall

thickness when sizing the bracket.

2 – Attach each bracket to a 1"x3"x12" piece of wood using two

wood screws provided.

3 – Fit-check the bracket on sidewall and mark the top wall of front

cabinet where each bracket is located. Notch top ¼" by 2 ⅛" at

each location.

4 – Attach 1"x3"x12" to sides of cabinet using three wood screws

(not provided), making sure that there is ¼" gap (very

important) from the top of 1"x3"x12" to the top of wall. If not,

adjust 1"x3"x12" up or down to set gap.

5 – Go to page “Adjusting Set Screws and Installing Countertop.”

Mounting Options continued

Bracket

1x3x12

Wall Thickness

1/4”

1x3x12