Installation Guide and Warranty Information
Multiple Applications The Victory Bracket is a multi-functional bracket designed to offer superior support for countertops, floating vanities, floating tables, shower benches, and more. The unique ribbed design of the Victory Bracket creates strength beyond that of bulkier, more expensive brackets, while still providing low-profile support.
Bracket Spacing Calculation Bracket Size Selection The two outer brackets should be placed 3" from the end or corner of the countertop. The spacing between brackets can be determined using the formula below: The Victory Bracket is designed to support overhangs between 8″ and 24″. The wall thickness must be between ¾″ and 4″. If necessary, attach plywood to inside of the cabinet wall to meet the minimum thickness requirement.
Internal Mounting Options The Victory Bracket can be mounted inside a cabinet or structural wall in a variety of ways. Option 1: Mount to Cabinet wall thickness usually ¾" to 2" Option 1A: Mounting Bracket to Back or Side of Cabinet 1 – Notch top wall ½” by 2 ⅛”. Cut ½” radius on inside wall. 2 – If mounting to side of cabinet, use a jigsaw to cut a slot at least ½" by 2 ⅛" in any support that obstructs the bracket’s fit. 3 – Using bracket as a template, mark and drill ⅛” pilot holes ½” deep.
Internal Mounting Options continued Option 1B: Mounting Bracket to Front of Cabinet with Doors Reference the numbers below with the diagram 1 – If there is not a 2" wide surface to mount bracket on front wall, a 1"x3"x7" piece of wood can be mounted to the cabinet sidewall several inches away from the front face. The distance from the front face to the back side of 1"x3"x7" becomes the wall thickness when sizing the bracket. 2 3 4 2 – Attach each bracket to 1"x3"x7" piece of wood with wood screws.
Internal Mounting Options continued Options 2 and 3: Mounting Bracket to Wall Reference the numbers below with the diagram 1 – Install 2x4 cross braces between wall studs to support bracket. The bracket can be mounted on stud or any location on cross braces. Use bracket as template to locate cross braces. 1 2 – If a single-level countertop, notch top of 2x4 cap ⅝" by 2 ⅛". Cut ⅝" radius on inside wall.
External Mounting Options The versatile Victory Bracket can also be mounted externally in a variety of ways. 1 – Install bracket after countertop is in place. 2 – If mounting to a structural wall, be sure to attach brackets to the wall studs or a minimum ¼" thick backing material. Do not mount bracket to drywall alone. Option 1: Mount to Cabinet wall thickness usually ¾" to 2" 3 – Make sure bracket fits tightly on wall surface and against bottom of countertop.
Warranty Information CONTACT INFORMATION If you have questions about bracket sizing or number of brackets for your specific countertop overhang, please send a diagram of your countertop along with a list of questions to info@steeldesignsolutions.com. INSTRUCTIONS DISCLAIMER Steel Design Solutions, Inc. (“SDS”) intends to make these installation instructions accurate and complete.