Pre-Assembly TOOLS REQUIRED Safety goggles HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA Part AA Description Cap 41x22x23 Quantity 4 SPECIFICATIONS Maximum capacity 75 lbs/tray Product weight 18.40 lbs.
Pre-Assembly (continued) PACKAGE CONTENTS A AA B C Part Description Quantity A Folding Latch 2 B Swivel caster with brake 2 C Swivel caster 2 AA Cap 22x24x23 4 5 Please contact 1-800-929-3299 for further assistance.
Assembly 1 Installing the casters □ Place the 4 caps (AA) on the bottom of the cart over the caster mounts. □ Mount the two swivel casters with brake (B) to the bottom of the cart. The swivel casters with brake (B) should be installed on the same side. □ The casters mount to the cart by turning the top support counter clockwise with your hand so the caster bolt is threaded into the cart, until it is hand- tight. Do not overtighten.
Operation 1 Opening the unit 2 Folding the unit WARNING: Keep hands and materials away from the folding seam in the trays when opening the cart to avoid pinching. □ Push the button on the Folding latch (A) on each side of the cart, and at the same time pull the cart in an upward motion. □ While the cart is in the folded position, gently pull the 2 sides of the top tray in an outward direction. The cart will start to unfold to the open position. □ The cart will rise to the folded position.
Maintenance 1 Maintaining the casters □ Grease the casters annually using high quality bearing grease. Care and Cleaning □ This utility cart has been coated with industrial powder coating for a durable finish. □ To help protect the finish, do not allow harsh chemicals (oil, grease, or other chemical) to remain on the powder coating surface. ® □ Use a glass cleaner (Windex or equivalent product) to clean and maintain all finished surfaces of powder coating.
