Owner manual

VIEWPOINT RUNNING BOARDS
2011-12 TOYOTA SIENNA
Page 4 of 6 9/20/12 (DP)
Driver Side Installation Pictured
(Fig 5) Remove plastic plug
on bottom of frame channel
10mm Bolt Plate
10mm Plastic Retainer
10mm STD Flat Washer
10mm Flange Nut
(Fig 9) Remove sealant to locate
factory hole for center Bracket
Front
(Fig 6B) Insert Bolt Plate with Plastic Retainer
into hole in bottom of frame channel
Fig 8
(Fig 6A) 10mm x 35mm Bolt Plate
(Fig 7) Driver side front
Support Bracket pictured
10mm Hex Bolt
(2) 10mm STD Flat Washers
10mm Flange Nut
Front
Front
Front