User Manual

GRILLE GUARD
2009-013 F-150
Page 4 of 7 1/31/13 Rev 5(DP)
Driver Side Installation Pictured
(Fig 4) Driver side Bracket
installation without tow hook
(Fig 5A) PASSENGER SIDE ONLY: Use the
Square Spacer on the forward mounting bolt to
cover the large opening in the Mounting Bracket
IMPORTANT: The passenger side Frame
Mounting Bracket is provided with more
adjustability to compensate for various model
years and frame configurations. The Bracket
requires the Square Spacer for proper installation
Front
Remove tow hooks if equipped
Front
(Fig 3) Driver side w/tow hook
(Fig 2) Use the factory tow
hook hardware or:
(1) 12mm Double Nut Plate
(2) 12mm x 35mm Hex Bolts
(2) 12mm Lock Washers
(2) 12mm Flat Washers
Insert 12mm Bolt Plate through
outermost hole in bumper bracket
Fig 5B
Front
Driver side frame
channel
Fig 6
Opening in center of bumper