Owner manual

Owner’s Manual
2
Pre-Start Preperation/Assembly
8
BEFORE OPERATION
NOTE: The engine and pump on your pressure washer will often have improved performance after a break-in
period of several hours.
PRE-START PREPERATION
Before starting the pressure washer, check for loose or missing parts and for any damage which may have
occured during shipping.
ASSEMBLY & START-UP
Hose & Gun Assembly
NOTE: Align threaded connections carefully to prevent damaging threads during assembly. Tighten
connections securely to prevent leaks during operation.
Attach the hose to the inlet on the trigger.
LUBRICATION
Do not attemp to start the pressure washer engine without filling the engine crank case with the proper
amount of oil. Your pressure washer has been shipped without oil in the crankcase. Operating the pressure
washer without oil will ruin the engine. Use oil that is recommended (10W-30). DO NOT OVERFILL!
FUEL
Fill the tank with unleaded gasoline. Regular gasoline may be used provided a high octane rating is obtained
(at least 85 octane).
Gasoline is highly flammable and explosive and you can be burned or seriously injured when refueling if not
carefull.
Wand
Hose