Manual

Owner's Manual

Operation (cont'd)

Starting

1 Make sure the electrical powered tools/equipment that will be used are

not plugged into the generator while the engine is started.

2 Open the fuel valve

3 Close the choke lever to

about 1/8" clearance.

4Turn the engine power switch to

its "ON" position.

5 Hold the start handle

loosely and pull it slowly several

time to allow the gasoline to flow

into the Engine's carburetor. Then

hold the start handle firmly and pull

the rope hard and fast. Pull the rope

all of the way out, using two hands if

necessaw. If necessaw pull the rope STARTER_RXe

several times until the engine starts.

6 Allow the engine to run for several

seconds. Then, open the choke lever

all the way.

ENGINE S_