Manual

Manua!
Assembly
HafldJeIflstaiJatiofl Floor Mount Instaiation
Start by installing the handle on the
frame with two 8mm bolts=
Then install the handle retainer as
shown.
Here is a picture of the floor
mounts installed.
This generator has an option of not using the mobility
kit. if this is desired, just install the 4 rubber mounts
on the frame as shown. (this is why there are 6
mounts), if you want to use the mobility kit, save the
4 mounts in a safe place, and continue to the
"mobility kit installation." section.