Manual

ASSEMBLY

Open Shipping Crate

1. Set the shipping crate on a solid, flat surface.

2. Carefully cut the shipping bands and remove lid of shipping crate.

3. Using two people to lift, carefully remove the engine, oil tank, wheels, tow bar, support legs, and

hardware. (For parts reference see page16-18 in manual)

4. Leave the hydraulic cylinder/log cradle in the shipping crate until step 5 in the assembly process.

5. Locate all hardware before beginning assembly.

STEP 1: WHEEL ASSEMBLY

Fix the wheel to the oiltank (#39) axle by a fiat

washer 020 (#74), slotted nut M16x1.5 (#110),

cotter {oin O4x36 (#52) and attach the axle cap

(#101),

ATTACH TOW BAR AND SUPPORT

LEG

Fix the support leg (#62) to the tow bar (#30) by

a pin(#42) and handle wheel (#105).

STEP 3: ATTACH TOW BAR TO OIL TANK

Fix the tow bar to the oil tank by using4 sets of

hex boltM12x40 (#31), fiat washer O12 (#3) and

lock nut M12 (#67).

STEP 4: ASSEMBLE REAR SUPPORT LEG

Fix the rear supportleg (#34) to the tow bar by using

hex bolt M10x75 (#36), lock nut M10 (#32), fiat

washer O10 (#97). Slide in hitch pin (#35) and

secure with R pinO3x55 (#26).

36 32 97