Manual

STEP 5: ATTACH HYDRAULIC CYLINDER
LOGCRADLE
Assemble the Beam to the tow bar, secure with
cotter pin O4x40 (#49) & hitch pin (#37).
!.p
49 37
STEP 7: ATTACH BALL COUPLER &
CHAIN
1. Attach the c6upler (#28) to the tow bar by
using hex bolt M12x80 (#43), flat washer O12
(#3) and lock nut M12 (#67).
2. Attach two chains (#41) to the tow bar by using
hex bolt M12x90 (#40), flat washer 012 (#3),
lock nut M12 (#67) and thick flat washer 012
(#681.
28
68
68
3 67
3 67
STEP 6: ATTACH ENGINE
1, Assemble the engine to the oil tank by using
hex bolt M10x60 (#48), flat washer O10 (#96),
lock washer O10 (#33) and lock nut M10 (#32).
2. Place 4 polyurethane blocks (#i00) and big
flat washer O10 (#99) between the engine and
mounting plate_
STEP 8: ATTACH WHEEL FENDERS
Attach two wheel fenders (#72) to the oil tank
using hex bolt M10x25 (#73), flat washer O10
(#96), lock washer O10 (#33) and lock nut M10
(#32).
14