Manual

STEP 9: ATTACH HYDRAULIC HOSES
1. Thread the outlet connector (#59) to the top of the gear pump (#47). Use Teflon tape to ensure tight fit.
2. Place an O ring (#61) onto the exposed threads of the outlet connector. Then attach hose (#13) to outlet
connector.
3. Attach hose (#t5) to the port on the oil tank. Place an O ring (#6t) on the port and tighten the hose using
Teflon tape.
4, Attach the oil pipe (#60) to the bottom of the gear pump (#47) by the clamp (#78).
15 13