Manual

OWIIeP'S MaNual
Troubleshooting
,_ WARNING: For your safety, turn the switch OFF and remove the safety key. Unplug the
power cord from the outlet before maintainingor lubricatingthe saw.
PROBLEM PROBABLE CAUSE REMEDY
Saw will notstud. t. Sawnot pluggedk_. 1. PNg in thesaw.
2. Fuseblow_or circuit breakertripped 2. Replacefuse or resetcircuBbreaker.
3 Corddamaged. 3. Havecord replacedby a_/authorizedservice
center.
4. Overloador low voltage. 4. Turn B_esaw switch to OFF,wait 5 minutes,
p_shthe resetswBch,a_/dturn the saw ON.
Does not makeaccmate450 t. Positivestop notadjusted correcdp. 1 Checkbladewith squarea_/dadjustpositive
and 90° Bpcuts stop.
2. Tilt angle pointeri_otset correcBy. 2. Check bladewith squarea_d adjustpointer
to zero.
Material pk_chesbladewhen t. Rip fencenotaligt_edwith blade. 1.Checkand adjustrip france.
ripping. 2. Warped wood, edgeagainstfenceis 2. Selectanotherpieceof wood.
not sBaigkt.
Material bk_dson spMter. SpIBter notalig nedcorrecBywith blade. Checkandalign splitterwBh blade.
Saw makesunsatisfactory t. Dull blade. 1. Replaceblade.
cuts. 2. BDdemom_tedbackwards. 2. Turn bladearound.
3 Gumor pitcho1_blade. 3. Removebladem_dcleanwith turpentineand
coarsesteelwook
4. Incorrectbladefor work. 4. Changetheblade.
5. Gumor pitch o1_taNecausingerratic 5.Cleantune wBhturpentinea_d steelwook
feed
Material kicked backfrom t. Rip fenceoutof alignment. 1. Align rip fencewith miter gauge.
blade. 2. SpIBternot alignedwBhblade. 2. Align spIBterwBhblade.
3. Feedingstock without rip fence. 3. Install and use rib re+ice.
4. SpIBternot in place. 4. Install and use splitter (wBhguard).
5. Dull blade. 5. Replaceblade.
6. Theopmator lettinggo of material B.Push materialall the way pastbladebefore
before it is pastthesaw blade, releasingwork.
7 Miter angleDek h_obis not tight. 7 Tighten knob
Blade doesnot raiseorflit Sawdust anddirt k_elevation andtilting Brushor Now outloosedust a_ddirt.
freely, mechanisms.
Blade doesnot reachfull t. Extensioncord too tightor too long. 1.Replacewith adequatesize cord.
speed. 2. Lowhousevoltage. 2. Contactyour electdccompany.
Maeldne vibratesexcessively, t. Sawnot mountedsecurelyto st,}nd or 1 Tightenall mountk_ghardware.
workbench.
2. St,;nd or bencho1_unevenfloor. 2. ReposBionon flat level s_dace.Fastento
floor if necessary.
3 Damagedsaw blade. 3. Replaceblade.
Does not make45°a_dgo° Mitergauge outof adiustment. Adiust miter gauge.
cross cuts.
Owner's Manua!
Replacementparts ... continued
QTY APA Parts He, No. Description QTY
3 PB101-46-SD 46 Fingel board 1
"1 PB101-47-SD 47 Wave washer(GB955+87 10)
1 PB10148-SD 48 Spring
2 PB101-49-SD 49 AdNstment bolt 1
2 PB101-50-SD 50 Pin(GB879_6 25x22) 1
"_ PB101-51-SD _ Control wheel _"
1 PB101-52-SD 52 Nut (GB6170-n6 Me) 2
PB1OI-OB-SD 08 Screw(GBB18-BBM5xBO) 6 PB101-53-SD 53 Wheellabel
PB1OI-O9-SD 09 Spgng washel(GBg3-87 5) 11 PB101-54-SD 54 Wheel handle
APA Parts No. No. Description
PB1OI-OI-SD 01 Screw(GB6562-86 STx16)
PB1OI-O2-SD 02 Rearcover
PB1OI-OB-SD 03 Strain relief
PB101-0g-SD 04 Brush holder
PB101-05-SD 05 Carbon brush
PB101-06-SD 06 Wire connector
PB1OI-OT-SD 07 Motor housing
8 PB101-55-SD 55 Screw 1
PB101-56-SD 56 Gear washer(GB8622-87 4) 1
PB101-57-SD 57 Flat washer(GB95-85 4) -4
PB101-58-SD 58 Screw(GB818-85 M4xl0) 1
PB101-59-SD 59 Lock washer(GB62 247 6) 12
PB101-60-SD 60 Bolt (GB5781-86 M6x16) 3
PB101-61-SD 61 Shut[ bube 3
PB101-62-SD 62 Screw
PB101-63-SD 63 Bignut (GB6170-86 M6)
PB101-64-SD 64 Washel plate
PB101-65-SD 65 Lock knob
PB101-66-SD 66 Screw 4
PB101-68-SD 67 Spring washer(GB93-87 6) 16
PB101-68-SD 68 Support boald e 1
PB101-69-SD 69 Fiat washer(GB95-85 6) 5
PB101-70-SD 70 Spring pin(GB879_6 4x8) 3
PB101-71-SD 71 Nut "3
PB101-72-SD 72 Spring
PB101-73-SD 73 Flat washel (GB848-85 10)
PB101-74-SD 74 Nut (GB6170-86 M5)
PB101-75-SD 75 Pivot Iod
PB101-76-SD 76 Underlay
PB101-77-SD 77 SCreW{GB70_85 M5x22)
PB101-78-SD 78 Rearaxis
PB101-79-SD 79 Plate
PB1OI-10-SD 10 Flatwasher (GB95-85 5)
PB101-11-SD 11 Stator
PelOlq 2-SD 12 Screw (GB818-85 MBx78)
Pel01q 3-SD 13 Beaung(GBeT276-94 629z)
PB101q4-SD 14 Rotor
PelOlq 5-SD 15 Beaung(GBeT276-94 6201)
PB101q6-SD 16 Wind washer
PB101-17-SD 17 Gearbox
PB101-18-SD 18 C-ring(GB894 1-86 14)
Pel01q 9-SD 19 Beaung(GBeT276-94 607z)
PB101-20-SD 20 Gear
PB101-21-SD 21 Spindle
PB101-22-SD 22 Key(GB61095-79 ABx12)
PB101-23-SD 23 C-ring (GB894 3-86 35)
PB101-24-SD 24 Beaung(GBeT276-94 6003)
PB101-25-SD 25 Bushing
PB101-26-SD 26 Gearbox cover
PB101-27-SD 27 In nange
PB101-28-SD 28 Blade
PB101-29-SD 29 Outnange 1
PB1OI-BO-SD 30 Blade nut 1
PB101-B1-SD 31 Pin "1
PB101-B2-SD 32 Screw {GB5781-86 M6x85) 1
PB101-BB-SD 33 Pin 1
PB101-B4-SD 34 Link plate 1
PB101-B5-SD 35 Locknut(GB_TBB91-2OOOM6) 14 PB1OI-BO-SD 80 Screw(GB819-n5M6x25)
PB101-B6-SD 36 Adjustments@port 1 PB101-B1-SD 81 Screw(GB70-nSMBx12) 2
PB101-B7-SD 37 Nut _ PB101-B2-SD 8"2 Table insert "T
PB101-BB-SD 38 Adjustment pin 1 PB101-BB-SD 83 Washer (GB8622-n7 5) 1
PB101-B9-SD 39 _GB5781-B6MBx18) 2 PB101-B4-SD 84 Screw 1
PB101-g0-SD 40 Support board A 1 PB101-B5-SD 85 Screw{GB70-nSMBxB5)
PB101-41-SD 41 Scaleboard 1 PB101-B6-SD 86 Worktable
PB101-g2-SD 42 Screw(GBB18-85MBx10) 2 PB101-B7-SD 87 BoJt(GBB781-nBMBxB5)
PB101-gB-SD 43 Nut(GB_TBB91-2000M8) 2 PB101-BB-SD 88 Gearwasher(GBBBB 2-87 5) 1
PB101-44-SD 44 indicator 1 PB101-BB-SD 89 Hex screW(_GB7O_5M5x8) 1
PB101-45-SD 45 Block plate 1 PB101-90-SD 90 Press plate 6
i)wneP'S Mslm1_a|
Replacementparts
When servicing your STEELE® 10" Bench Saw, use identical STEELE® replacement parts only
Use of any other parts may cause product damage Any and all servicing of the
bench saw should be performed by a qualified service technician
WARNING: ANY ATTEMPT TO REPAIR OR REPLACE ELECTRICAL PARTS ON THIS TOOL
MAY CREATE AHAZARD UNLESS REPAIR IS DONE BY QUALIFIED SERVICE TECHNICIANS.
/
_J
2 PB101-134-SD 134 Front nip boald
2 PB101-135-SD 135 Screw(GB818-86M4x6)
PB101-136-SD 136 indicator
PB101-137-SD 137 Pin
1 PB101-138-SD 138 Guide ruler
-9 PB101-139-SD 139 Gauge pointer
1 PB101-140-SD 140 Spring washer
8 PB101-141-SD 141 Screw(GB818_6M4X6)
PB101-142-SD 142 Mitre gauge
12 PB101-143-SD 143 Angle bolt
3 PB101-144-SD 144 Lockknob
-3 PB101q45-SD 145 Knob cover
1 PB101-146-SD 146 Blade guard
PB101-147-SD 147 Block pin 2
PB101-148-SD 148 Spring washer _"
PB101-149-SD 149 Guard arm 1
PelOlq 50-SD 150 Bush 2
PB101-151-SD 151 Spring _"
PB101-152-SD 152 FoJDwblade board 1
PB101-153-SD 153 Ang¢ickbackpawl 2
PB101-154-SD 154 BoJt(GB5781+86M6x22)
PB101-lBS-SD 155 Bolt (GB5781 86 Mex4O) 2
PB101-lBB-SD 156 Fiatwashel(GB95-85 6) 6
PB101-157-SD 157 Blockbushing-R
PB101-158-SD 158 Spdng pin(GB879-86 3x10) 1
PB101-159-SD 159 Block bushing-L
PB101-160-SD 160 Hex boJt(GB70-85 M6x12) 6
PB101-161-SD 161 Press plate
PB101-162-SD 162 Hex boJt(GB70-85 MSx20)
PB101-163-SD 163 Flatwasher (B95 B6-5)
PB101-164-SD 164 Support base
PB101-165-SD 165 Dado inser
PB101-166-SD 166 Wrench
PB101-167-SD 167 Open ended wrench
PB101-168-SD 168 Push stick 4
PB101-169-SD 169 Power cord 1
QTY
PB101-94-SD 94 Spring plate
PB101-95-SD 95 Fence base
PB101-96-SD 96 Base
PB101-97-SD 97 DataJabeJ
PB101-PB-SD 98 Inner plate
PB101-99-SD 99 Screw(GB81945 M4x8)
PB101q00-SD 100 Gear plate
PB101q01-SD 101 Screw(GB84845 ST4x16)
PB101q02-SD 102 Switch base
PB101q0B-SD 103 Switch
PB101q04-SD 104 Circun breaker
PB101-10B-SD 105 Deaker nut
PB101q06-SD 106 Switch box
PB101q07-SD 107 nustproof ring
PB101q08-SD 108 Wire holder
PB101q09-SD 109 Screw (GB848-85 ST4x16) 2
PB1OldlO-SD 110 Strain relief 1
PB101-111-SD 111 Spindle _"
PelOlq 12-SD 112 Dust port cover 1
PB101q13-SD 113 Screw (GB848+85 ST4x16)
PB101-114-SD 114 Nut(GB6170-86M4)
PelOld 15-SD 5 Mgre gauge storage 1
PB101-116-SD 6 Spring plate _"
Pel01q 17-SD 117 Spdng washer(GB93-87 4) 2
PB101-118-SD 118 Screw(GB818-85 M4xlO)
PB101qlB-SD 119 Rubbelfoot
PB1Olq20-SD 120 Rearphte
PelOlq 21-SD 121 Spring
PB101q22-SD 122 Spfingdefenceboald
PB101q23-SD 123 Fence
PB101q24-SD 124 Bolt
PelOlq 25-SD 125 Hex boJt(GB5871 86 MexlO) 2
PB101q26-SD 126 Washelphte 1
PB101q27-SD 127 Fence support 1
PB101q28-SD 128 Long nut
Pel01q 29-SD 129 Spring pin (GB878-86 3x22)
PB101-130+SD 130 Bias wheel
Replacement parts
APA Parts No. No. Description QTY APA Parts No. No. Description
PB101-91-SD 91 Scalelabe] 1 PB101-131-SD 131 Pin
PB101-92-SD 92 Rivet(GB827-n62x6) "3 PB101-132-SD 132 Fence handle
PB101-PB-SD 93 Screw(GB848_5 ST4xt2) 11 PB101-133-SD 133 Pin
Owner's _anua],