Manual

Owner's Manual
ACCESSORIES
Use only accessories that are recommended by the manufacturer for your modeL Accessoriesthat
may besuitaNe for oneteenmay become hazardouswhen usedon another tool
Always attach grounded (3-prong) extension cordste grounded(3=ptoag)outlets.
ifyou must use an exteasien cord, hesure that the gauge islarge enoughto carrythe ameunt of
current necessaryfor your power teal nfnot, your teenmay experiencea loss of power, excessive
voltage drop or overheating,Forexample,the smaller the gaugenumber, the heavierthe cord,
TROUBLESHOOTING
Noisy? Reviewthe probablecauseand remedy:
A) Incorrect belt tension A) Adjust tension operation
B) Dry spindle B) Removespindle/ quill assemblyand lubricate
C) Loosepulley lubricate C)Tighten Pulley
D) Worn bearing D) Replacebearing
Excessivedrill wobble? Reviewthe probablecauseand remedy:
A) Loose chuck A) Tighten by pressing chuck down onto a block of
wood againstthe table.
B) Worn spindle or bearing B) Replacespindle shaft or bearing
C) Worn chuck C) Replacechuck
D) Bentdrill bit D) Replacedrill bit
Motor won't start? Reviewthe probablecauseand remedy:
A) Power supply A) Checkpower cord/fuse start
B) Motor connection B) Checkmotor connections
C) NVRswitch connections C) Checkswitch connections
D) FaultySwitch D) Replaceswitch
E) Motor Windings Burned E)ReplaceMotor
Drill Bit Bindsin Workpiece?Reviewthe probablecauseand remedy:
A) ExcessiveFeedPressure A) Apply less pressure
B) LooseBelt B) CheckBelt tension
C) LooseDrill Bit C)Tighten drill bit with key
D) Incorrect drill speed D) Referto Cutting Speedchart, and adjust drill speed accordingly
Table difficult to raise? Reviewthe probablecauseand remedy:
A) Needslubrication A) Lubricate with light oil
B) Tablelocktightened B) Loosenclamp
Owner's Manual
HEADASSEMBLYDIAGRAM
9
/ 55 56
HEADASSEMBLYPARTSLIST
APAParts No. No. Description APAParts No. No. Description
PB214-O1-HY 01 Knob PB214-31-HY 31 Battery
PB214-O2-HY 02 0eperatinsIhandle PB214-32-HY 32 Electric_
PB214-O3-HY 03 Handle holder PB214-33-HY 33 Cableclami#!Egplate
PB214-O4-HY 04 Gearshaft PB214-34-HY 34 Screw
PB214-O5-HY 05 Depth scale label PB214-35-HY 35 Cableand plug
PB214-O6-HY 06 Scale label ring PB214-36-HY 36 Allen key
PB214-O7-HY 07 De_ knob PB214-37-HY 37 Allen key
PB214-O8-HY 08 Rivet PB214-38-HY 38 Fixing bracket for light holder
PB214-O9-HY 09 Depth pointer PB214-39-HY 39 Light holder
PB214-10-HY 10 Laser guide PB214-40-HY 40 Screw
PB214-11-HY 11 Teethwasher PB214-41-HY 41 Cylinder pin
PB214-12-HY 12 Earthterminal PB214-42-HY 42 Machine body
PB214-13-HY 13 Elastic washer PB214-43-HY 43 Belttension adjusting handle
PB214-14-HY 14 Screw PB214-44-HY 44 Screw
PB214-15-HY 15 Switch box PB214-45-HY 45 Motors@porting bar
PB214-16-HY 16 Switch boxplate PB214-46-HY 46
PB214-17-HY 17 Switch PB214-47-HY 47 _lever
PB214-18-HY 18 Work light switch PB214-48-HY 48 Screw
PB214-19-HY 19 Screw PB214-49-HY 49 Bolt
PB214-20-HY 20 Screw PB214-50-HY 50 Elastic washer
PB214-21-HY 21 Flat washer PB214-51-HY 51 Flat washer
PB214-22-HY 22 Nut PB214-52-HY 52 Flat washer
PB214-23-HY 23 Screw PB214-53-HY 53 Motor base
PB214-24-HY 24 Spring PB214-54-HY 54 Elastic washer
PB214-25-HY 25 Spring cap PB214-55-HY 55 Nut
PB214-26-HY 26 Nut PB214-56-HY 56 Motor
PB214-27-HY 27 Laser guider switch PB214-57-HY 57 Motor pulley
PB214-28-HY 28 Battery box cover PB214-58-HY 58 Screw
PB214-29-HY 29 Battery box PB214-59-HY 59 Nut
PB214-30-HY 30 Screw PB214-60-HY 60