Manual

Product specification
Component _ specification
Rated power 3600w/5HP
Rated sPeed ...............................................................
Displacement _ t40cc
Cutting width
1.5" to 3" (3 Positions)
Wheels 7"and12"
30kg
1. Remove the handle knobs from the mower housing
impoAant: Route the cables to the outside of
the handle as you install the handle.
Safe_ and instructional Decals
lmpo_ant: Safety and instruction decals are located near
areas of potential danger, Replace damaged decals.
I, HandLe knob (2)
2. Move the handle to the operating position.
3. Install and tighten the handle knobs that you removed
in step I (Figure 2).
2. Filling the Engine with Oil
Your mower does not come with oil in the engine, but it
does come with a bottle of oil.
1. Remove the dipstick (Figure 3)
1, Warning--read the Operator's Manual.
2. Thrown o_ect haza ep bystanders a safe dista-
nce from the machine.
3. Cutting/dismemberment hazard of hand or foot, mower
blade--disconnect the spark-plug wire and read the
instructions before servicing or performing maintenance.
4. Cutting/dismemberment hazard of hand or foot, mower
blade--stay away from moving paAs and keep aH
guards and shields in pla_.
5. Cutting/dismemberment hazard of hand or foot, mower
blade_o not mow up and down slopes, only mow
across;stop the mower and engine, pick up debris befo-
re operating;look behind and down when reversing.
Impo_ant:Remove and discard the protective plastic
sheet that covers the engine.
1, Unfolding the Handle
Folding or unfolding the handle improperly can damage
the cables, causing an unsafe operating condition,
Do not damage the cables when folding or unfolding
the handle,
if a cable is damaged, contact an Authorized Service
Dealer.
_ute 3
2. Slowly pour oil into the oil tube until the oil leve! reach-
es the Full line on the dipstick (Figure 4). Do not ove_ll
(Max.20 oz, (&59 0, type: SAE 30 detergent oil with an
API se_ice of SF,SG, SH, SJ, SL, or higher.)
Note: If you overfill the engine, pour some oil out of it as
directed in Changing the Engine Oil.
3. Install the dipstick securely.
Impo_ant: Change the engine oil after the first 5 operat-
ing hours; change it yearly thereafter.Refer to Changing
the Engine Oil
3