Replacement Part List
ST1007/12/14 15" & 20" Planers (Mfd. Since 9/17)
-63-
ST007/ST1012 Label Placement
Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine MUST
maintain the original location and readability of the labels on the machine. If any label is removed
or becomes unreadable, REPLACE that label before using the machine again. Contact Woodstock
International, Inc. at (360) 734-3482 or www.shopfoxtools.com to order new labels.
REF PART # DESCRIPTION REF PART # DESCRIPTION
501 XST1007501 EYE/EAR/LUNG HAZARD LABEL 507 XST1007507 STEELEX LOGO PLATE
502V2 XST1007502V2 MACHINE ID LABEL W/CSA (ST1007) V2.03.17 508 XST1007508 READ MANUAL LABEL
502V2 XST1012502V2 MACHINE ID LABEL W/CSA (ST1012) V2.03.17 509 XST1007509 ELECTRICITY LABEL
503 XST1007503 DO NOT OPEN COVER LABEL 510 XST1007510 CONTROL PANEL LABEL
504 XST1007504 DISCONNECT POWER LABEL 511 XST1007511 TOUCH-UP PAINT, STEELEX TAN
505 XST1007505 SHIFT GEARBOX LABEL 512 XST1007512 PINSTRIPE TAPE
506 XST1007506 MODEL NUMBER LABEL (ST1007) 513 XST1007513 TOUCH-UP PAINT, SHOP FOX BLACK
506 XST1012506 MODEL NUMBER LABEL (ST1012)
.
ST1007
ST1007 Machine Labels A
(02/23/16)
• 1:1 Scale (Labels are
actual size)
• Labels must be made of
chemical-resistant material
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Woodstock will not accept labels changed without
approval. If artwork changes are required, contact us immediately at
manuals@woodstockint.com.
COLOR CODES
DANGER
PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005
WARNING
MODEL ST1007
15" PLANER WITH MOBILE BASE
1. Read & understand owner’s manual before
operating.
2. Always wear approved eye and hearing protection
and respirator.
3. Disconnect power before setup, adjustments, or
service.
4. Keep all guards in place and in proper operating
condition.
5. Be aware of "kickback" hazards and how to
prevent them.
6. Plug power cord into grounded outlet only.
7. Make sure machine is correctly set up, adjusted, and
rests securely on flat, level ground before operating.
8. Do not wear loose clothing, gloves, jewelry, or other
items that can get entangled. Tie back long hair and
roll up sleeves.
9. Do not plane boards with cracks, loose knots, or any
other defects.
10. Never make adjustments to the table during cutting
operation.
Specifications
Cutterhead Speed: 4800 RPM
Cutterhead: 3" Dia., 3-Knife
Knife Size: 15" x 1" x 1/8"
Weight: 640 Lbs.
Motor: 3 HP, 240V, 1-Ph, 60 Hz
Full-Load Current: 15A
Maximum Depth of Cut: 1/8"
Minimum Stock Thickness: 3/16"
Minimum Stock Length: 8"
Maximum Cutting Height: 8"
Maximum Cutting Width: 15"
Feed Rates: 16 & 30 FPM
Replacement Knives: D3635
Date
Serial Number
Manufactured for Woodstock in China
To reduce the risk of serious injury when using this machine:
11. Do not reach into the cutting area while machine is
running.
12. Stand clear of board ends while planing.
13. Only operate in dry environment free of rain or
dampness.
14. Do not operate under the influence of drugs or
alchohol.
15. Prevent unauthorized use by children or untrained
users; restrict access or disable machine when
unattended.
WARNING!
***IMPORTANT***: This label must have individual letters/numbers. Do not print with clear background.
ST1007 Machine Labels B
(02/17/16)
• 1:1 Scale (Labels are
actual size)
• Labels must be made of
chemical-resistant material
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Woodstock will not accept labels changed without
approval. If artwork changes are required, contact us immediately at
manuals@woodstockint.com.
COLOR CODES
PANTONE 151 C or RAL 2005
WARNING
PANTONE YELLOW C
CAUTION
Only shift gearbox when
planer is running.
Neutral
30 FPM
16 FPM
Do not open this cover while machine
is connected to power or is running.
Disconnect power before servicing.
Failure to comply will result in serious
personal injury.
WARNING!
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(
360
)
734-3482.
WARNING!
WARNING
ACCIDENTAL
INJURY HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
ST1007 Machine Labels B
(02/17/16)
• 1:1 Scale (Labels are
actual size)
• Labels must be made of
chemical-resistant material
COLOR CODES
PANTONE 151 C or RAL 2005WARNING
PANTONE YELLOW C
CAUTION
Only shift gearbox when
planer is running.
Neutral
30 FPM
16 FPM
Do not open this cover while machine
is connected to power or is running.
Disconnect power before servicing.
Failure to comply will result in serious
personal injury.
WARNING!
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(
360
)
734-3482.
WARNING!
WARNING
ACCIDENTAL
INJURY HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
ST1007 Machine Labels B
(02/17/16)
• 1:1 Scale (Labels are
actual size)
• Labels must be made of
chemical-resistant material
COLOR CODES
PANTONE 151 C or RAL 2005
WARNING
PANTONE YELLOW C
CAUTION
Only shift gearbox when
planer is running.
Neutral
30 FPM
16 FPM
Do not open this cover while machine
is connected to power or is running.
Disconnect power before servicing.
Failure to comply will result in serious
personal injury.
WARNING!
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(
360
)
734-3482.
WARNING!
WARNING
ACCIDENTAL
INJURY HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
ST1007 Machine Labels B
(02/17/16)
• 1:1 Scale (Labels are
actual size)
• Labels must be made of
chemical-resistant material
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Woodstock will not accept labels changed without
approval. If artwork changes are required, contact us immediately at
manuals@woodstockint.com.
COLOR CODES
PANTONE 151 C or RAL 2005
WARNING
PANTONE YELLOW C
CAUTION
Only shift gearbox when
planer is running.
Neutral
30 FPM
16 FPM
Do not open this cover while machine
is connected to power or is running.
Disconnect power before servicing.
Failure to comply will result in serious
personal injury.
WARNING!
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(
360
)
734-3482.
WARNING!
WARNING
ACCIDENTAL
INJURY HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
ST1007 Machine Labels B
(02/17/16)
• 1:1 Scale (Labels are
actual size)
• Labels must be made of
chemical-resistant material
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Woodstock will not accept labels changed without
approval. If artwork changes are required, contact us immediately at
manuals@woodstockint.com.
COLOR CODES
PANTONE 151 C or RAL 2005
WARNING
PANTONE YELLOW C
CAUTION
Only shift gearbox when
planer is running.
Neutral
16 FPM
Do not open this cover while machine
is connected to power or is running.
Disconnect power before servicing.
Failure to comply will result in serious
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(
360
)
734-3482.
WARNING!
WARNING
ACCIDENTAL
INJURY HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
ST1007 Machine Labels B
(02/17/16)
• 1:1 Scale (Labels are
actual size)
• Labels must be made of
chemical-resistant material
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Woodstock will not accept labels changed without
approval. If artwork changes are required, contact us immediately at
manuals@woodstockint.com.
COLOR CODES
PANTONE 151 C or RAL 2005
WARNING
PANTONE YELLOW C
CAUTION
Only shift gearbox when
planer is running.
Neutral
30 FPM
16 FPM
Do not open this cover while machine
is connected to power or is running.
Disconnect power before servicing.
Failure to comply will result in serious
personal injury.
WARNING!
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(
360
)
734-3482.
WARNING!
WARNING
ACCIDENTAL
INJURY HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
STOP
START
POWER
ST1007 Machine Labels C
(02/22/16)
• 1:1 Scale (Labels are
actual size)
• Labels must be made of
chemical-resistant material
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Woodstock will not accept labels changed without
approval. If artwork changes are required, contact us immediately at
manuals@woodstockint.com.
(02/17/16)
• Labels must be made of
chemical-resistant material
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Woodstock will not accept labels changed without
approval. If artwork changes are required, contact us immediately at
manuals@woodstockint.com.
COLOR CODES
PANTONE 151 C or RAL 2005
WARNING
PANTONE YELLOW C
CAUTION
Only shift gearbox when
planer is running.
Neutral
30 FPM
16 FPM
Do not open this cover while machine
is connected to power or is running.
Disconnect power before servicing.
Failure to comply will result in serious
personal injury.
WARNING!
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(
360
)
734-3482.
WARNING!
WARNING
ACCIDENTAL
INJURY HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
501
502V2
503
504
505
506
509
510
511
508
507
503
513
512
ST1007
ST1014 Machine Labels A
(03/10/16)
• 1:1 Scale (Labels are
actual size)
• Labels must be made of
chemical-resistant material
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Woodstock will not accept labels changed without
approval. If artwork changes are required, contact us immediately at
manuals@woodstockint.com.
COLOR CODES
DANGER
PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005
WARNING
***IMPORTANT***: This label must have individual letters/numbers. Do not print with clear background.
MODEL ST1014
20" PLANER WITH HELICAL CUTTERHEAD
1. Read and understand owner’s manual before
operating.
2. Always wear approved eye protection, hearing
protection, and respirator.
3. Disconnect power before setup, adjustments, or
service.
4. Keep all guards in place and in proper operating
condition.
5. Be aware of "kickback" hazards and how to
prevent them.
6. Plug power cord into grounded outlet only.
7. Make sure machine is correctly set up, adjusted, and
rests securely on flat, level ground before operating.
8. Do not wear loose clothing, gloves, jewelry, or other
items that can get entangled. Tie back long hair and
roll up sleeves.
9. Do not plane boards with cracks, loose knots, or any
other defects.
10. Never make adjustments to the table during cutting
operation.
Specifications
Cutterhead: Helical w/Indexable Inserts
Number of Inserts: 100
Insert Size: 15 x 15 x 2.5mm (Curved)
Replacement Inserts: D4655
Weight: 771 lbs.
Motor: 5 HP, 240V, 1-Ph, 60 Hz
Full-Load Current: 19A
Maximum Depth of Cut: 1/8"
Minimum Stock Thickness: 3/16"
Minimum Stock Length: 8"
Maximum Cutting Height: 8"
Maximum Cutting Width: 20"
Feed Rates: 16 & 20 FPM
Cutterhead Speed: 4800 RPM
Date
Serial Number
Manufactured for Woodstock in China
To reduce the risk of serious injury when using this machine:
11. Do not reach into the cutting area while machine is
running.
12. Stand clear of board ends while planing.
13. Only operate in dry environment free of rain or
dampness.
14. Do not operate under the influence of drugs or
alchohol.
15. Prevent unauthorized use by children or untrained
users; restrict access or disable machine when
unattended.
WARNING!
***
MODEL ST1007
15" PLANER WITH MOBILE BASE
1. Read & understand owner’s manual before
operating.
2. Always wear approved eye and hearing protection
and respirator.
3. Disconnect power before setup, adjustments, or
service.
4. Keep all guards in place and in proper operating
condition.
5. Be aware of "kickback" hazards and how to
prevent them.
6. Plug power cord into grounded outlet only.
7. Make sure machine is correctly set up, adjusted, and
rests securely on flat, level ground before operating.
8. Do not wear loose clothing, gloves, jewelry, or other
items that can get entangled. Tie back long hair and
roll up sleeves.
9. Do not plane boards with cracks, loose knots, or any
other defects.
10. Never make adjustments to the table during cutting
operation.
Specifications
Cutterhead Speed: 4800 RPM
Cutterhead: 3" Dia., 3-Knife
Knife Size: 15" x 1" x 1/8"
Weight: 640 Lbs.
Motor: 3 HP, 240V, 1-Ph, 60 Hz
Full-Load Current: 15A
Maximum Depth of Cut: 1/8"
Minimum Stock Thickness: 3/16"
Minimum Stock Length: 8"
Maximum Cutting Height: 8"
Maximum Cutting Width: 15"
Feed Rates: 16 & 30 FPM
Replacement Knives: D3635
Mfd. for Woodstock in China
To reduce the risk of serious injury when using this machine:
11. Do not reach into the cutting area while machine is
running.
12. Stand clear of board ends while planing.
13. Only operate in dry environment free of rain or
dampness.
14. Do not operate under the influence of drugs or
alchohol.
15. Prevent unauthorized use by children or untrained
users; restrict access or disable machine when
unattended.
WARNING!
Date
S/N