Use and Care Manual

-4-
ST1007/12/14 15" & 20" Planers (Mfd. Since 9/17)
Model Number ST1007 ST1012 ST1014
Main Specifications
Planer Size 15 in. 20 in.
Max. Cut Width 15 in. 20 in.
Max. Stock Thickness 8 in.
Min. Stock Thickness 3/16 in.
Min. Stock Length 8 in. 8 in. 8 in.
Number of Cuts Per Inch 42, 63 56, 104 104, 83
Number of Cuts Per Minute 15,000 24,000
Cutterhead Speed 4800 RPM
Planing Feed Rate 16, 30 RPM
Max. Cut Depth Planing Full Width 3/32 in. 1/8 in.
Max. Cut Depth Planing 6-Inch Wide
Board
1/8 in.
Dust Port Size 4 in. 5 in.
Cutterhead Info
Cutterhead Type 3-Knife Helical Helical
Cutterhead Diameter 3 in. 3
1
⁄8 in.
Number of Knives 3 N/A N/A
Knife Type HSS, Single-Sided, Solid N/A N/A
Knife Length 15 in. N/A N/A
Knife Width 1 in. N/A N/A
Knife Thickness
1
⁄8 in. N/A N/A
Knife Adjustment Springs or Jack Screws N/A N/A
Number of Cutter Rows N/A 5 5
Number of Indexable Cutters N/A 75 100
Cutter Insert Type N/A Indexable Carbide Indexable Carbide
Cutter Insert Length N/A 15 mm 15 mm
Cutter Insert Width N/A 15 mm 15 mm
Cutter Insert Thickness N/A 2.5 mm 2.5 mm
Table Info
Table Movement 8 in.
Table Bed Length 20 in. 25
3
⁄4 in.
Table Bed Width 15 in. 20 in.
Table Bed Thickness 1-3/4 in.
Floor-to-Table Height 27 – 35 in. 26
1
⁄2–34
1
⁄2 in.
Construction
Table Precision-Ground Cast Iron
Body Cast Iron
Stand Steel
Cutterhead Assembly Steel
Infeed Roller Serrated Steel
Outfeed Roller Knurled
Paint Type/Finish Powder Coated