User's Manual

WIRING: 4-PIN Shock Sensor (22 Gauge wires)

SHOCK SENSOR: The sensor supplied with this system does not require any additional wiring. Simply mount the

sensor in a suitable location, plug it in, and adjust the sensitivity. There are 2 LED’s on the shock sensor to assist

you in adjusting sensitivity. The Blue LED indicates the “Warn Away” level and the Red LED indicates a full alarm

shock sensor violation.

Use the adjustment knob to set the sensitivity of the sensor. The adjustment knob adjusts both Pre-Warn and alarm

trigger.

BLUE LED

RED LED

(-) PRE-WARN

(-) TRIGGER

GROUND

12 VOLTS

YELLOW

ORANGE

BLACK

RED

(Trigger)

(Pre-Warn)

Adjustment

SHOCK SENSOR