User's Manual

CONVENIENCE AND SAFETY FEATURES

VALET MODE

Before servicing your vehicle or handing the keys over to a Valet we recommend putting the unit into Valet Mode.

The Remote Start function WILL NOT operate when in Valet Mode.

1. To Activate Valet Mode Manually: Turn the ignition on and press the Valet button [about 5-6 seconds] until

the LED turns on solid. Repeat the process to exit VALET mode.

2. To Activate Valet Mode with the Remote: Press and hold both the Lock and Unlock Button

together for about 3 seconds until 3 chirps are heard (horn must be connected). Repeat this step

to exit via the remote transmitter. Lock / Unlock and AUX features will still operate in VALET Mode however

Remote Start is inhibited.

ANTI-GRIND (Optional, relay not included)

This Optional feature prevents the user from accidentally grinding the starter if the Ignition key is turned too far to

the start position while engine is already running from the remote starter. The Anti-Grind requires the use of an

external relay.

HOOD OPEN SAFETY (Requires hood pin switch)

Prevents remote starting engine when hood is open. Eliminates risk of injury to someone working under the hood of

the vehicle with a properly working hood pin installed. If Remote Start button is pressed with the hood open, the

parking lights will flash twice and the unit will not attempt a start. The system will abort Remote Start any time the

hood is opened. See Remote Start Diagnostics on page 14.

BRAKE PEDAL RESET:

Prevents starting or turns off a remote started vehicle when this circuit is active. Prevents Unauthorized Driving of

Vehicle. This circuit shuts the system down immediately when brake pedal is pressed. Turn the ignition key to the

“ON” position before the brake pedal is pressed. If Remote Start button is pressed with the brake pressed, the

parking lights will flash once and the unit will not attempt a start. See Remote Start Diagnostics on page 14.

OEM ALARM INTERFACE (May require optional Databus Module)

This feature is designed to Disarm and Re-arm Factory equipped security systems in conjunction with remote start

and keyless entry (if needed for your vehicle). This feature will maintain the original integrity and security of your

vehicle’s factory equipped systems before, during, or after remote start. Some vehicles require an optional Databus

module to operate a factory alarm or keyless entry.