User's Manual

TRANSMITTER PROGRAMMING on 4 & 5 BUTTON

Note: All transmitter codes must be learned at time of programming!! The Pro Start system learns up to 4

different transmitter codes.

4. Turn ignition key to the ON position.

5. Press Programming button 4 times, after a few seconds the unit flashes the parking lights 4 times.

6. Press Lock button of the first transmitter. You should get 1 light flash confirming the remote is coded, then press

Lock button of a second transmitter, the unit will flash 2 times confirming the remote is coded and so on. If all 4

codes are learned, the unit will automatically exit code learning mode, otherwise turn key off. See diagram

below.

IGN

OFF

WAIT FOR

4 FLASHES

PRESS 4X's

FLASH 2, 3, or 4 X's

IGN

OFF

COMPLETE

PRESS LOCK