User's Manual

BATTERY REPLACEMENT on 5 BUTTON REMOTE

To Replace the Battery:

The Remote Control uses two CR-2025 Lithium 3 Volt Batteries. Simply remove the Phillips screw located behind

key ring (see diagram below). Use a small screw driver as shown in Figure 2 to remove the back cover. Slide old

batteries out. Insert the new batteries into plastic cover and slide into place with the (+) end facing up. The plastic

cover keeps the batteries from shorting out against the side of metal housing.

VEH

UNLOCK

START

DISARM /

ARM /

LOCK

TRUNK

Vehicle Select

CR2025

2 Screws

Back Cover

Remove

2 Screws &

Slide Key Ring Off

Blue / Red

Green / Red