User Manual

INITIALIZATION

1. Turn on your Nimbus by sliding the Hold switch on the top of the Nimbus to the unlocked position.

2. All four LEDs will fade on and o slowly to indicate your Nimbus is now in pairing mode. If not, hold

the pairing button for 3 seconds.

3. To pair your Nimbus to your iOS device, go to Settings > Bluetooth. “Nimbus” will be displayed on the screen.

Tap to Connect.

RECONNECTING TO AN EXISTING DEVICE:

During the connecting sequence, the LEDs will fade on and o, cycling from 1 to 4. The Nimbus will automatically

reconnect to the most recent device when powered on. If you want to connect to a previously paired device, simply

select the Nimbus from the Bluetooth menu on the Apple device.

PAIRING TO A NEW DEVICE:

Press the pairing button for 3 seconds. All four LEDs will fade on and o slowly to indicate that your Nimbus is

in pairing mode.

POWERING ON/OFF:

To turn o the power, slide the Hold switch to the “lock” position on the top of the Nimbus. Orange should

be visible, indicating switch is in the “lock” position. If left in the unlocked position, the controller will turn itself o

after 15 minutes of inactivity. To power on the Nimbus after an auto power o, simply press and hold the MENU

button.

BATTERY INDICATION:

When the Nimbus battery charge gets low (~20 minutes remaining), LED 1 will ﬂash quickly for 10 seconds.

Please download the SteelSeries Nimbus companion app from the iTunes store.

Please go to www.steelseries.com/nimbus/faq for more detailed product information.