P.
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The three main types of hardware used to assemble this product are: wood dowels, screws and bolts. V. The provided glue is to secure wood dowels in place.
Parts List 2 1 3 4 2 5 6 8 10 2 9 1 3 7 2 5 6 8 2 5 6 7 11 11 P.
Hardware List A Ø8x30mm Wooden dowel 30 pcs B Ø6x35mm Cam bolt 20 pcs C Ø15x11mm Cam lock 20 pcs D Ø30mm Sticker 20 pcs E Ø6x38mm Screw 35 pcs F Ø1/4*x12mm Bolt 21 pcs G Ø1/4"x30mm Bolt 4 pcs H M4 Hex key 1 pc J Ø1/4"x18mm Bolt 12 pcs K Bracket 1 pc L Flat washer 1 pc Screw 1 pc Wall anchor 1 pc Screw 2 pcs Glue tube 1 pc M Ø4x30mm N P Q Ø4x50mm Philips head screwdriver required for assembly (not included) The hardware quantities listed ab
Step 1 x2 x3 x5 B B 1 A A 5 A A A 3 2 A A 6 A B A A B Insert wooden dowel (A) into parts (1,2,3,5,6), then secure cam bolt (B) into parts (1,3,5,6) with Philips head screwdriver as per diagram. P.
1 Step 2 2 3 5 C 2 6 C 2 x3 Using Cam lock(C) secure parts (5,6) to part (2) with Philips head screwdriver as per diagram. P.
Step 3 6 E 2 5 8 E E E E E x2 E H Using Screw (E) attach part (8) into parts (2,5,6) with hex key (H) as per diagram. P.
Step 4 6 E 2 5 7 E E E E E E H Using Screw (E) attach part (7) into parts (2,5,6) with hex key (H) as per diagram. P.
1 Step 5 2 3 1 C 2 3 C 2 x2 Using Cam lock(C) secure parts (1,3) to part (2) with Philips head screwdriver as per diagram. P.
Step 6 3 E 2 1 E 7 E E E E E H Using Screw (E) attach part (7) into parts (1,2,3) with Hex key (H) as per diagram. P.
Step 7 3 E 2 1 4 E E E E E H E Using Screw (E) attach part (4) into parts (1,2,3) with Hex key (H) as per diagram. P.
Step 8 4 8 3 7 6 9 8 3 6 7 6 F H Using Bolt (F) attach part (9) to parts (4,7,8) with Hex key (H) as per diagram. Note: Do not fully tighten all bolts . P.
Step 9 5 5 5 J 9 H Using Bolt (J) attach part (9) to parts (5) with Hex key (H) as per diagram. P.
Step 10 11 11 9 G H Using Bolt (G) attach part (9) into part (11) with Hex key (H) as per diagram. P.
Step 11 11 8 11 8 11 8 P Using Screw (P) attach part (8) into part (11) with Philips head screwdriver as per diagram. P.
Step 12 4 10 8 7 8 7 F H Using Bolt (F) attach part (10) into parts (4,7,8) with Hex key (H) as per diagram. P.
Step 13 11 J 11 G 6 J J G 6 J J J 6 10 H Using Bolt (J) attach part (10) into part (6) ，then using Bolt (G) attach part (10) to part (11) with Hex key (H) as per diagram. Note: Fully tighten all bolts. P.
Step 14 D D D D 4 D D D D D D D H K F Place sticker (D) cover the holes ,then using Bolt (F) attach Bracket (K) to part (4) with Hex key (H) as per diagram. P.
1 Step 15 2 3 WARNING Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is permanently fixed to the wall. Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors.
Step 16 Final Assembly P.
