Datasheet

85
STEGO - PRODUCT CATALOGUE MONITORING
SMART SENSOR
CSS 014 |
DC 24 V
TECHNICAL DATA
Measuring signals
analog (4-20 mA)/digital (IO-Link)
digital (IO-Link)
temperature, humidity
events, diagnosis, device data
Max. reaction time 3 min.
Load resistance (external) ≤ 500 Ω (4-20 mA only)
Connection M12 round plug connector, IEC 61076-2-101, 4-pin, A-coded,
shielded
Electrical protection Reverse-polarity, short circuit, overvoltage protection
Mounting clip for 35 mm DIN rail, EN 60715 and screw fixing M5
Casing plastic according to UL94 V-0, light grey
Dimensions 140 x 40 x 38 mm
Weight approx. 50 g
Fitting position vertical, connection on top
Storage temperature -40 to +85 °C (-40 to +185 °F)
Operating/Storage humidity max. 90 % RH (non-condensing)
Protection type
1
/Protection class IP20 (sensor only IP57) / III (SELV)
Approvals VDE, UL File No. E500143 (acc. to IEC 61010-1/DIN EN 61010-1), EAC
Note other measuring ranges on request
1
The PCB (printed circuit board) is coated on both sides with a certified protective lacquer to protect against corrosion and for
improvement of the tracking resistance.
The compact Smart Sensor CSS 014 electronically records temperature and humidity and converts the measured
data into a standardized analog 4-20 mA or a digital IO-Link signal. The converted value signals can be utilized or
further processed by a control or monitoring unit, e.g. a PLC control. The Smart Sensor is suitable for installation
inside and outside the enclosure, even in harsh environmental conditions as can be found in the wind power
industry: in shielded outdoor areas and exposed to vibrations.
> Analog/digital interface
> Small size
> Easy clip and/or screw fixing
> Quick connection (M12 plug-in
connector)
> High accuracy
> Large temperature and humidity range
> Various application areas
(IEC 61010-1/DIN EN 61010-1)
Art. No. Interface Operating
voltage
Power
consumption max.
Temperature
measuring range
Humidity
measuring range
Operating
temperature
01420.2-00 4-20 mA (analog) DC 24 V (DC 12-30 V) 1.8 W (typically 0.4 W) -40 to +60 °C (-40 to +144 °F)
 1 K 0 to 100 % RH ± 4%
2
-40 to +70 °C (-40 to +158 °F)
01411.2-00 IO-Link (digital, specified
acc. to version 1.1)
DC 24 V (DC 18-30 V) 0.3 W -40 to +80 °C (-40 to +176 °F) ± 0.3 K 0 to 100% RH ± 3%
2
-40 to +80 °C (-40 to +176 °F)
2
Tolerance within 20 to 80 % RH (please request diagram for tolerances outside this range).
Example of connection
Pin assignment for 4-pin
M12 round plug connector
analog 4-20 mA
Protection type IP57
31.01.2020 | Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application. www.stego.de | www.stego.co.uk | www.stegonorden.se
85
TECHNICAL DATASHEET