Datasheet

41
STEGO - PRODUCT CATALOGUE
HAZARDOUS AREA HEATER
CREx 020 | 50 W to 250 W (T3)
TECHNICAL DATA
Temperature class T3
Ex Protection type II 2 GD
Gases
Dusts
Ex db IIC T3 Gb
Ex tb IIIC T200°C Db IP66
Ambient temperature -60 to +85 °C (-76 to +185 °F)
Surface temperature max. +200 °C (+392 °F)
Heating element high performance cartridge
Heating body aluminium profile, silver anodised
Connection silicone cable (halogen-free) 3 x 0.75 mm², length 1 m
Connection PE 0.75 to 2.5 mm²
Mounting clip for 35 mm DIN rail, EN 60715
for heating body sizes 80 x 48 mm and 120 x 60 mm;
screw fixing with 2 plug-on flanges for all heating body sizes,
optional widthwise mounting
Fitting position vertical airflow (connection on bottom)
Storage temperature -60 to +85 °C (-76 to +185 °F)
Operating/Storage humidity max. 90 % RH (non-condensing)
Protection type/Protection class IP66 / I (earthed)
Approvals EPS 16 ATEX 1 109 X
IECEx EPS 16.0048X
EAC
Compact convection heater of temperature class T3 (200 °C max.) for use in areas with explosion hazard for
prevention of formation of condensation, temperature fluctuations, and for protection against frost in control
and switch cabinets, as well as in measuring equipment.
> For areas with explosion hazard
> Large convection surface
> Clip and screw flange fixing
> Ready-to-use with strain relief
> Maintenance free
> Temperature class T3
Clip fixing Screw flange fixing Operating voltage Heating capacity Rec. pre-fuse T
(time-delayed)
Dimensions
(D x W x H)
Weight approx.
Art. No. Art. No. Hole spacing X
02031.0-00 02031.0-10 150 mm AC 230 V 50 W 0.5 A 80 x 48 x 110 mm 0.7 kg
02031.9-00 02031.9-10 150 mm AC 120 V 50 W 1.0 A 80 x 48 x 110 mm 0.7 kg
02032.0-00 02032.0-10 225 mm AC 230 V 100 W 1.0 A 80 x 48 x 180 mm 1.0 kg
02032.9-00 02032.9-10 225 mm AC 120 V 100 W 2.0 A 80 x 48 x 180 mm 1.0 kg
02033.0-00 02033.0-10 225 mm AC 230 V 150 W 1.5 A 120 x 60 x 180 mm 1.4 kg
02033.9-00 02033.9-10 225 mm AC 120 V 150 W 3.0 A 120 x 60 x 180 mm 1.4 kg
02034.0-00 02034.0-10 300 mm AC 230 V 200 W 2.0 A 120 x 60 x 240 mm 1.7 kg
02034.9-00 02034.9-10 300 mm AC 120 V 200 W 4.0 A 120 x 60 x 240 mm 1.7 kg
- 02035.0-10 275 mm AC 230 V 250 W 2.5 A 160 x 80 x 220 mm 2.3 kg
- 02035.9-10 275 mm AC 120 V 250 W 5.0 A 160 x 80 x 220 mm 2.3 kg
CREx 020 with
screw flange fixing
CREx 020 with
clip fixing
Photo Art. No. 02033.0-00
D
W
H
25
X
HEATING
04.04.2017 | Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application.
www.stego.de | www.stego.co.uk | www.stegonorden.se
41
TECHNICAL DATASHEET