Datasheet

1
STEGO - PRODUCT CATALOGUE
www.stego.de | www.stego.co.uk | www.stegonorden.se
The Flat Heater CP 061 is used to provide an evenly distributed temperature within enclosures and cabinets with
electric/electronic components. Its ultra-thin design makes it particularly suitable for high-density applications
for which standard enclosure heaters are often too big in size. Depending on the application, the Flat Heater can
be used as a convection heater or as a contact heater. When used as a contact heater it offers thermoconductive
contact to a component or a cabinet wall in need to be heated. Additionally, a mounting system especially desig-
ned for the CP 061 allows for the compensation of an expansion of the heater body as a result of the heating-up
when in operation. Operated as a convection heater, the slim heater CP 061 warms up the ambient air within a
cabinet. The CP 061 is designed for continuous operation.
> Contact/Convection heater
> Ultra flat design
> Compact
> Easy, firm installation
> Screw fixing
> Linear expansion compensation
> Integrated temperature cut-out
> Ready-to-use with strain relief
FLAT HEATER
CP 061 |
50 W, 100 W
TECHNICAL DATA
Heating element resistance heater
Surface temperature max. 150 °C at +25 °C/+77 °F
Heater body aluminium profile
Temperature safety cut-out to protect against overheating, automatic reset
Connection silicone cable (halogen-free) 3 x 0.75 mm², length 1 m
Connection casing plastic according to UL94 V-0, black
Mounting screw fixing (M6)
Fitting position horizontal, variable connection or
vertical, connection on bottom
Dimensions L x 100 x 8 mm
Operating/Storage temperature
-40 to +60 °C (-40 to +140 °F) / -40 to +85 °C (-40 to +185 °F)
Operating/Storage humidity max. 90 % RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
Note other voltages (AC 120 V) on request
Example of connection
Art. No. Operating voltage Heating capacity Length (L) Hole spacing (X) Weight (approx.) Approvals
06100.0-00 AC 230 V, 50/60 Hz 50 W 239 mm 225 mm 0.4 kg VDE submitted EAC intended
06101.0-00 AC 230 V, 50/60 Hz 100 W 414 mm 400 mm 0.7 kg VDE submitted EAC intended
1
TECHNICAL DATASHEET
www.stego.de | www.stego.co.uk | www.stegonorden.se
22.11.2018 | Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application.