Datasheet

103
STEGO - PRODUCT CATALOGUE
TECHNICAL DATA
Mounting thread M50 x 1.5 with nut (wrench size 60 mm, housing 50 mm)
Torque 6 Nm max.
Depth in enclosure max. 17.5 mm
Material plastic according to UL94 V-0, umbra grey,
weather proof and UV light resistant according UL746C (f1)
Water entry height 0 mm (at 0.5 mm wall thickness)
Sealing sealing gasket NBR
Water flow-through approx. 200 ml/h at a water column of 5 mm
Dimensions Ø 60 x 49.5 mm
Fitting position horizontal, lowest point
Operating/Storage temperature -45 to +70 °C (-49 to +158 °F)
Approvals EAC
Installation: Make cut-out Ø 50.5
+0.5
mm in enclosure bottom and mount drainage device with nut. Please make sure that the
sealing gasket is put in place on the outer side panel of the enclosure and the hole is free of burrs.
Art. No. Protection type Enclosure wall thickness 1 package unit Weight (approx.)
08410.0-00 IP66 / IP67 (EN 60529) / IP69K (EN 40050-9) 0.5 – 5.5 mm 1 piece 60 g
DRAINAGE DEVICE
DD 084 | IP66 / IP67 / IP69K
Condensate occurs in enclosures and housings with high protection type by variations in temperature. The use
of a drainage device allows the conveying of the condensate without loosing the maximum protection type of
IP66. The water permeable membrane makes sure the drainage of the enclosure by the capillary attraction. The
construction prevents the infiltration of splash water into the enclosure.
> High degree of protection
> Good drainage performance
> Easy to install
> Robust, weather and UV-light
protected housing
Photo: Inside view
Fitting position
ACCESSORIES
04.04.2017 | Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application.
www.stego.de | www.stego.co.uk | www.stegonorden.se
103
TECHNICAL DATASHEET