Datasheet

37
142
67
120
182
160
STEGO - PRODUCT CATALOGUE
TECHNICAL DATA
Heating element PTC resistor – temperature limiting
Temperature safety cut-out to protect against overheating in case of fan failure, automatic reset
Axial fan, ball bearing airflow 160 m³/h, free flow
service life 50,000 h at +25 °C (+77 °F)
Connection 2-pole max. 2.5 mm², clamping screw with strain relief,
torque 0.8 Nm max.
Casing plastic according to UL94 V-0, black
Mounting clip for 35 mm DIN rail, EN 60715 or screw fixing (M6)
Fitting position vertical airflow (air outlet up)
Dimensions 182 x 160 x 120 mm
Weight approx. 1.3 kg
Operating/Storage temperature -45 to +70 °C (-49 to +158 °F)
Operating/Storage humidity max. 90 % RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
COMPACT HIGH-PERFORMANCE FAN HEATER (SEMICONDUCTOR)
CS 130 | 1,200 W
The compact high performance fan heater prevents formation of condensation and frost and provides an evenly
distributed interior air temperature in enclosures with electric/electronic components. The plastic housing provi des
double insulation and acts as protection against contact. The fan heater is available with optional integrated
thermostat for temperature control. The CS 130 was designed as a stationary unit for wall fixing. For fixing on the
bottom of the enclosure the fan heater CS 030 is recommended.
> Compact design
> High heating performance
> Double insulated
> Integrated thermostat (optional)
> Optional clip or screw fixing
Heating capacity / Ambient temperature diagram CS 130
Temperature (°C)
Connection diagram
Art. No. Model Operating voltage Heating
capacity¹
Inrush current
max.
Recommended
pre-fuse T (time-delay)
Setting range² Approvals
13060.0-00 Fan Heater with thermostat AC 230 V, 50/60 Hz 1,200 W 13.0 A 10.0 A 0 to +60 °C VDE UL File No. E150057³ EAC
13060.0-01 Fan Heater without thermostat AC 230 V, 50/60 Hz 1,200 W 13.0 A 10.0 A - VDE UL File No. E150057³ EAC
13060.9-00 Fan Heater with thermostat AC 120 V, 50/60 Hz 1,200 W 16.0 A 16.0 A +32 to +140 °F - UL File No. E150057³ EAC
13060.9-01 Fan Heater without thermostat AC 120 V, 50/60 Hz 1,200 W 16.0 A 16.0 A - - UL File No. E150057³ EAC
¹ at +20 °C (+68 °F) ambient temperature; ² Switch temperature difference 7 K (±4 K tolerance); ³ according to UL 508A, NITW File on request
Heating capacity (W)
HEATING
04.04.2017 | Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application.
www.stego.de | www.stego.co.uk | www.stegonorden.se
37
TECHNICAL DATASHEET