ASSEMBLY INSTRUCTIONS ITEM# 22240 @ 1.Place the table top down on a smooth and protective surface. 2.Place leg in one corner so that the holes in the leg align with the holes in the corner block. 3.Using the Allen wrench, tighten a bolt, spring washer and flat washer into each hole 4. Repeat for the other 3 legs. HARDWARE PACK fl bmm ALLEN WRENCH 1PC (ym (mmm 0 "#2" BOLT PCS Sy ly 7%â BOLT PCS fâ FLAT WASHER PCS &â SPRING WASHER PCS WOODEN STOPPER PCS 1. Turn the table upright 2. Insert stick.