Specifications

The Controls and Connectors

Operation Manual

ENGLISH

The Controls and Connectors

Front Panel

■ CUBASE READY lamp

This LED lamp indicates whether the CC121 is

turned on or not and whether communication

between the CC121 and the computer is enabled or

not. This lamp ﬂashes to indicate that the CC121 is

bus-powered from the connected computer. When

the lamp is lit continuously, communication with the

computer is enabled and Link functions are avail-

able.

IMPORTANT

To use the Link function between the CC121 and

Cubase, you will need to install Cubase/Cubase AI

version 4.5 or higher. For details, refer to the following

website.

http://service.steinberg.de/goto.nsf/show/

supportupdates_cc121_gb

■ Channel sections

This section lets you control the track selected on

Cubase. When the Read Automation is turned on,

the events generated via the operations in this sec-

tion will be recorded to the current track on Cubase.

1 Fader

This 100 mm touch-sensitive motorized fader lets

you control the mixer fader of the current track on

Cubase.

Channel sections (page 15) EQ sections (page 16) Function section (page 17)

AI KNOB section (page 19)Transport section (page 17)

CUBASE READY

lamp (page 15)

)