User manual

217
The Control Room (Cubase only)
The Control Room Mixer
Deactivate All Listen States
When this button is lit, one or more channels in the MixConsole are listen-enabled.
Click this button to deactivate Listen for all channels.
Use Reference Level
When you click this button, the Control Room level is set to the reference level
specified in the Preferences dialog (VST–Control Room page). The reference level is
the level that is used in calibrated mixing environments, such as film dubbing stages.
Press [Alt]/[Option] and click this button to set the reference level to the current
Control Room level.
Ö Use the reference level for film or DVD mixing and set the level to the speaker volume
that corresponds to the mixing standard that you use.
Dim Signal
When you activate this button, the Control Room level is lowered by a fixed amount.
This allows a quick reduction in monitor volume without disturbing the current monitor
level. Clicking on the DIM button again returns the monitor level to the previous
setting.
Listen Enable for Output
This button activates the Listen bus function for the Control Room output. If this
button is not activated, the Listen bus is not routed to that channel.
Listen DIM Level
This control adjusts the volume of the Main Mix when channels are in Listen mode.
This allows you to keep listen-enabled channels in context with the Main Mix. If the
Listen DIM level is set to the minimum value, you only hear the listen-enabled
channels. Any other setting includes the Main Mix at a lower level.
Listen Level
This control determines how loud Listen bus signals are when they are routed to the
Control Room output.