User manual

426
Working with track presets
Applying track presets
4. When you have found the preset that you want, double-click on it (or click outside
the Presets browser).
The preset is applied.
• To return to the preset that was selected when you opened the Presets browser,
click the “Revert to Last Setting” button.
Reloading track or VST presets
When you have modified the settings of a track or VST preset and are not satisfied
with the results, you can revert to the default settings of the preset by clicking the
“Reload Track Preset” button.
Applying inserts and EQ settings from track presets
Instead of handling complete track presets, it is also possible to apply insert or
equalizer settings from track presets. Proceed as follows:
1. Select the desired track, open the Inspector or the Channel Settings window and
click the VST Sound button on the Inserts or Equalizers tab/section.
The Preset Management pop-up menu opens.
2. On the pop-up menu, select “From Track Preset…”.
The Presets browser opens, showing all available track presets that contain inserts
or EQ settings.
3. Select a track preset and click outside the browser.
For information on the general handling of inserts presets, see “Effect presets” on
page 243. The general handling of EQ presets is described in the section “Using EQ
Presets” on page 197.
Extracting sound from an instrument track or VST preset
For instrument tracks, you can extract the “sound” of an instrument track preset or
VST preset, that means the VST instrument and its settings. Proceed as follows:
1. Select the instrument track to which you want to apply a sound.
2. Click the VST Sound button below the Output Routing field in the Inspector.
The Presets browser opens, showing a list of all available presets.
3. Select an instrument track preset or VST preset by double-clicking on it.
The VST instrument and its settings (but no inserts, EQs, or modifiers) on the
existing track are overwritten with the data of the track preset. The previous VST
instrument for this instrument track is removed and the new VST instrument with
its settings is set up for the instrument track.