User manual

431
Track Quick Controls
Assigning parameters to quick controls
Assignment via the Learn function
Using the “QC Learn Mode” button on the Quick Controls tab in the Inspector, you
can assign a parameter by moving the corresponding control:
• Activate the “QC Learn Mode” button, select the slot to which you want to assign
a parameter and use the desired control.
All automatable controls can be learned this way.
Assignment via a plug-in panel
You can assign effect parameters to quick control slots directly from within the plug-
in panel:
• To assign an effect parameter to the topmost quick control slot, right-click the
parameter and select the “Add x to Quick Controls” option (where “x” is the name
of the parameter).
• To assign an effect parameter to a specific quick control slot, right-click the
parameter, select the “Add x to Quick Controls Slot” option (where “x” is the name
of the parameter), and select the desired slot from the submenu.
Ö These options are only available for VST 3 plug-ins that support this function.
Manual assignment via the Inspector tab
Proceed as follows to manually assign track parameters:
1. On the Quick Controls tab, click on the first quick control slot.
A pop-up menu opens. It lists all parameters currently accessible for this particular
track.
2. Double-click the parameter that you want to assign to the first quick control slot.
The parameter name and its value are displayed in the slot. You can change the
value by dragging the slider.
The track’s main volume parameter is assigned to quick control 1.
3. Repeat these steps for each quick control slot until all eight slots are associated
with track parameters.
You can now control the 8 functions most important to you via one single Inspector
section.
• To rename a quick control, double-click on the name in the slot to select it, enter a
new name and press [Enter].
• To replace a parameter assignment with a different parameter, click on the
corresponding quick control slot and double-click a different parameter.