User manual

444
Remote controlling Cubase
The Remote Control Editor
Defining the Controls
You can define the operation for a particular switch or knob. This includes changing
the LED ring or changing its behaviour, from continuous value representation to
on/off, for example.
• Right-click the control and select a new control style in the settings window or
select the control and select a style in the inspector.
Ö To be able to make settings for a control, it has to be assigned to a function.
Ö Not all hardware devices support all control type settings.
Control Type Settings for Knobs
The following control types are available for knobs:
• Standard
A standard knob with undefined LED style.
• Toggle Switch
This is best used for parameters with two states, like On/Off buttons.
• LED Ring
An LED ring is shown around the knob. The setting increases clockwise.
• LED Ring (counter-clockwise)
An LED ring is shown around the knob. The setting increases counter-clockwise
from right to left.
• Center Width
The LED ring starts at the top center position and when the settings increase, an
LED is shown growing in both directions.
• Center Neutral
The dial starts at the top center position and can be moved left or right, like a pan
control, for example.
• Single Dot
As “LED Ring”, but showing only a dot to indicate the current value.