User manual

466
Using MIDI devices
MIDI devices – general settings and patch handling
New Preset
This adds a new preset in the selected bank or folder.
You can rename the preset by clicking it and typing a new name.
When the preset is selected, the corresponding MIDI events (Program Change, Bank
Select, etc.) are shown in the event display to the right. The default setting for a new
preset is Program Change 0 – to change this, proceed as follows:
• To change which Program Change value is sent out to select the patch, adjust the
number in the Value column for the Program Change event.
• To add another MIDI event (e. g. Bank Select) click directly below the last event in
the list and select a new event from the pop-up menu.
After adding a new event, you need to set its value in the Value column, as with
Program Change.
• To replace an event, click on it and select another event from the pop-up menu.
For example, a MIDI device may require that a Bank Select message is sent first,
followed by a Program Change message, in which case you would need to replace
the default Program Change message with a Bank Select message and add a new
Program Change after that.
• To remove an event, select it and press [Delete] or [Backspace].
Add Multiple Presets
This opens a dialog, allowing you to set up a range of presets to be added to the
selected bank or folder.
Proceed as follows:
1. Add the event types required for selecting a patch in the MIDI device.
This is done just as when editing the settings for a single event: clicking in the
event display brings up a pop-up menu from which you can select an event type.
2. Use the Range column to set up either a fixed value or a range of values for each
event type in the list.
!
For details on which MIDI events are used for selecting patches in the MIDI device,
consult its documentation.
!
Different devices use different schemes for Bank Select. When you insert a Bank
Select event, you should check the device’s documentation to find out whether to
choose “CC: BankSelect MSB”, “Bank Select 14 Bit”, “Bank Select 14 Bit MSB-LSB
Swapped” or some other option.